Manufacturing Method of Welded Pipe Spiral Chute

Manufacturing Method of Welded Pipe Spiral Chute

Manufacturing Method for Welded Pipe Spiral Chutes 1. Overview: The gravity beneficiation spiral chute summarizes the characteristics of gravity beneficiation spiral chutes, gravity beneficiation spiral chutes, shakers, and gold concentrators. It has been evaluated and approved by relevant scientific research, design, universities, and beneficiation plants organized by the Ministry of Metallurgy. It is believed that this type of mechanical performance is superior, the beneficiation indicators are advanced, and it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry. It is now in the field of non-ferrous metals Ferrous is used in great quantities. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ethylene, tungsten sand, sand tin, tantalum, tantalum niobium and other nonferrous metals, rare metals and non nonferrous gold mineral bodies with gravity difference from fine materials with Granularity of 0.3-0.02 mm. 2、 The mortar with the same working principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the selection width of each product, the equipment gathering hopper will collect and export the obtained multi head ore flow. The transverse plane of the spiral chute and the different slopes of the curves are particularly suitable for the separation of small particles of mineral materials. Method 3 for Manufacturing the Spiral Chute of Welded Pipe @ @ 000: Features 1. Stable Selection Process and Easy Control 2. Wide Range of Allowable Changes in Feed Density 3. High Enrichment Ratio and Recycling Efficiency 4. Small Land Area and Low Water Consumption 5. Simple Construction and No Power 6. High Processing Output 7. Simple Installation and Operation 8. Low Investment and Rapid Effectiveness. Manufacturing Method for Spiral Chute of Welded Pipe 4 The fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding trough, a rotating trough, a product selection trough, an equipment gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The rotating groove has a pre designed durable and wear-resistant layer on the selected surface. She has the advantages of lightweight, solid, and durable use of consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer above it to screen the ore, which is also easy to operate. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mineral mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new equipment cutting groove, allowing other new products to be selected and classified into three (or four) categories according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multi-directional mineral flow. The transverse section of the spiral chute has a slope change, which is particularly suitable for the sorting of fine-grained materials. 5、 This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to get iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, placer tin ore, tantalum niobium, niobium ore or other non-ferrous metal ores, rare metals and non-ferrous metal minerals with different density and specific gravity. Manufacturing Method for Welded Pipe Spiral Chute Manufacturing Method for Welded Pipe Spiral Chute

Manufacturing Method of Welded Pipe Spiral Chute