Product display/Product display

Silicon processing equipment

24-hour phone/WhatsApp：+8619870423316

What are the Silicon processing equipment

At present, the commonly used silica processing equipment mainly includes rod mills, magnetic separators, flotation machines, obstructed settlers, hydrocyclones, spiral chutes, high-frequency and high-efficiency dewatering screens, inclined plate thickeners, scrubbers, desilting hoppers, slurry pumps, etc. The common processing process of silica is to remove mineral impurities from the raw material silica through scrubbing, desliming, magnetic separation, chute re selection, flotation, acid washing, or a combination of several methods to obtain high-purity silica sand with particle size and impurity content that meet the requirements.

The specific silica processing equipment needs to be configured according to the silica processing process confirmed by the customer.

Silicon processing equipment image：

硅石选矿设备(图1)

硅石选矿设备(图2)

硅石选矿设备(图3)

硅石选矿设备(图4)

Silicon processing equipment Details：

1、 Overview

Silicon ore mainly contains quartz and chalcedony, and the content of silicon dioxide is also high. In order to improve the comprehensive utilization rate of silicon ore, mineral processing is necessary. What are the processing equipment for silicon ore? In order to solve this problem, Jinqiang has configured an efficient silicon processing equipment based on the properties of silicon ore. The following is a brief introduction to several important equipment in silicon processing equipment.

2、 Silicon processing equipment

1. Jaw crusher - crushing equipment.

The jaw crusher is mainly used for the primary crushing operation of raw silicon ore, mainly for crushing silicon blocks into uniformly sized particles. The crushed silicon ore fully meets the requirements for the feed inlet of the next equipment ball mill. This equipment has the characteristics of high crushing efficiency, easy operation, large crushing ratio, and long service life. It is a good silicon ore crushing equipment.

2. Ball mill - grinding equipment.

A ball mill is used to grind silica ore. Compared to other grinding equipment on the market, this equipment has the following advantages.

A. All components are processed with good steel, and the equipment has strong wear resistance and impact resistance, which not only prolongs the replacement cycle of vulnerable parts, but also extends the service life of the equipment.

b. The main bearing adopts large diameter double row self-aligning roller bearings, reducing friction and energy consumption during the working process.

c. The operation is very convenient, the working process is pollution-free, and to a certain extent, the surrounding environment is improved, meeting national environmental standards.

d. Due to the lack of inertial impact, the equipment operates more stably, improving the grinding efficiency of the equipment, and the particle size of the silicon ore product is also very uniform.

3. Flotation machine - Flotation equipment.

The use of a flotation machine as a flotation operation for silica ore has the following advantages in improving concentrate grade.

A. The processing capacity of silicon ore is large, with a unit time processing capacity of 3-4 times that of a general flotation machine, and the equipment energy consumption is also very low.

b. Easy to maintain, the flotation cell has no operating components, a compact internal structure, and a relatively small footprint.

c. The degree of automation is also very high, saving time and effort, saving a lot of costs for silicon ore processing plants, and the wear resistance of various components is also very good.

d. There is almost no noise during the construction process, with high flotation efficiency and no restrictions on the construction environment.

4. Dryer - Drying equipment.

The dryer is mainly used for drying the silica slurry after flotation. This equipment has high drying efficiency and is easy to operate and maintain. In addition, it also has characteristics such as stable operation, energy conservation and consumption reduction, affordable price, and low-carbon environmental protection. It is a very good silicon ore drying equipment.

Composition of silicon processing equipment products:

1. Crushing equipment - jaw crusher

2. Grinding equipment - ball mills

3. Flotation equipment - flotation machine

4. Drying equipment - drying machine

5. Other conveying equipment, ore washing equipment, feeding equipment, etc

The specific silicon processing equipment needs to be configured according to the silica processing process confirmed by the customer.

Welcome to consult Jinqiang for more silicon processing equipment and silicon ore processing technology. The technical manager will provide you with technical solutions and equipment quotations.

Silicon processing equipment Related products