Advantages and disadvantages of spiral chute beneficiation

Advantages and disadvantages of spiral chute beneficiation

The advantages and disadvantages of spiral chute beneficiation are as follows: 1. Introduction: Gravity beneficiation spiral chute combines the characteristics of gravity beneficiation spiral chute, fiberglass spiral chute, shaking table, and beneficiation centrifuge. After scientific research organized by the Ministry of Metallurgical Industry, design, university, and beneficiation company, it has been determined that this equipment has excellent performance and progress in beneficiation indicators. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry and has now been awarded in the field of non-ferrous metals Ferrous mines are very versatile. This product is suitable for sorting iron ore, ferrotitanium, ferrochrome, pyrite, zircon, Rutile, monazite, ethylene phosphate, tungsten, tin placer, tantalum, tantalum niobium and other nonferrous metal ores, rare ore metals and non-metallic ore bodies with density and specific gravity differences. 2、 The production principle is that the evenly proportioned mortar is slowly fed onto the rotating groove surface through a feeding chute installed on the spiral groove head for sorting. The tail end of the spiral groove is equipped with a valve type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected variable mineral flows to converge and export differently. The transverse plane and slope of the curve of the fiberglass spiral chute vary greatly, and the applicable range is for the selection of fine particle materials. Advantages and Disadvantages of Spiral Chute Beneficiation III. Characteristics This product is suitable for separating 0.3-0.02mm fine materials to obtain iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. This equipment also has stable and easy to operate selection processes, a wide range of allowable changes in feed density, high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, strong processing ability, easy installation, easy operation, low investment, and quick effectiveness. Advantages and disadvantages of spiral chute beneficiation IV. According to the Granularity of the processed ore materials, the chute can be divided into three categories: (1) coarse spiral chute. The maximum particle size of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Mineral sand chute, processing 2-3 millimeter sized ore. (3) Slime spiral chute, feeding Granularity<0.074mm. 5、 The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, cassiterite, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and non-metallic mineral materials with sufficient density ratio difference. Advantages and Disadvantages of Spiral Chute Beneficiation Advantages and Disadvantages of Spiral Chute Beneficiation

Advantages and disadvantages of spiral chute beneficiation