Jiangxi spiral chute model

Jiangxi spiral chute model 1 introduces that gravity separation is widely used in the beneficiation of metallic and non-metallic ores due to its low environmental pollution and low cost. Glass fiber reinforced plastic chute is one of the gravity beneficiation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particle sizes of -0.2mm. In the sorting step, there is no need to add water to wash, and the bottom of the chute is divided into sections to obtain refined, medium, and tailings. 2、 The mineral mortar with average production principle is slowly fed onto the surface of the spiral groove through the feeding chute at the head end of the rotating groove, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type equipment selection groove, which divides the sorted products into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each equipment, the product gathering hopper allows for the differentiation, convergence, and export of the obtained variable mineral flow. The cross-section and slope of the spiral chute are extremely suitable for the separation of fine ore materials. Jiangxi spiral chute model 3. Characteristics This product is suitable for separating fine materials with a particle size of 0.3-0.02mm to obtain iron ore, titanium iron ore, chromite ore, pyrite ore, zircon sand, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different densities and specific gravity. This equipment also has stable and easy to operate selection processes, a wide range of allowable changes in feed density, high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, strong processing ability, easy installation, easy operation, low investment, and quick effectiveness. Jiangxi spiral chute model IV. According to the particle size of processed ore, the chute can be divided into three categories: (1) coarse spiral chute. The maximum Granularity of ore feeding is above 2-3MM, and the maximum can reach 100-200mm. (2) The sand ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03MM and vein or placer ores, but it is unfavorable for sorting when the mud content is high. Now it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal and riverside ore sands, and gold mines. Jiangxi Spiral Chute Model Jiangxi Spiral Chute Model