Weight of spiral chute

Spiral chute weight 1. Overview: Spiral chute for gravity beneficiation summarizes the characteristics of spiral chute for gravity beneficiation, spiral chute for gravity beneficiation, shaking table, and gold concentrator centrifuge. It has been evaluated and approved by relevant scientific research, design, universities, and concentrators organized by the Ministry of Metallurgy, and is believed to have superior mechanical performance, advanced sorting indicators, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has now been awarded in the field of non-ferrous metals Ferrous is used in great quantities. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ethylene, tungsten sand, sand tin, tantalum, tantalum niobium and other nonferrous metals, rare metals and non nonferrous gold mineral bodies with gravity difference from fine materials with Granularity of 0.3-0.02 mm. 2、 Working principle: The fiberglass chute sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface through the feeding chute installed at the head end of the rotating groove for sorting. The tail end is equipped with a valve block type product cutting groove, which divides the selected equipment into three categories (or four categories) radially according to grade. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export differently. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine particle ore materials. The weight of the spiral chute is three. Features and highlights: 1. Large scale and large production capacity. Today, the overall requirement for processing mineral materials is to establish profits through large-scale production. 2. Fine granulation is used for the treatment of fine particle grade mineral materials, especially for minerals with a particle size of -0.047mm. The original machinery can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., the spiral concentrator has progressed from simple use of gravity and water flow resistance to the level of combined use of centrifugal force, machine vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials and the separation of fine and micro particles are increased, thereby increasing the mineral recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, it needs small floor area, space, water and electricity consumption. 5. Easy and flexible operation, stable selection process, simple structure, and convenient maintenance and management. The weight of the spiral chute is , and the structure of the spiral concentrator consists of a feeding average device, a cross (tripod), a feeding groove, a spiral groove, a selection groove, a gathering bucket, and a groove pillar. 5、 The use of a field spiral concentrator is suitable for processing 0.6-0.03 millimeters or vein ore and this sand, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used in the processing of iron, tungsten, sand tin, tantalum niobium, coastal or riverside sand mines, as well as sand gold mines. Spiral chute weight Spiral chute weight