Spiral chute bottom curve

Spiral chute bottom curve 1. Introduction: The fiberglass spiral chute summarizes the characteristics of gravity separation spiral chutes, spiral chutes, shakers, and centrifuges for mineral processing. After being evaluated by relevant scientific research, design, school, and concentrator units organized by the Ministry of Metallurgical Industry, it is believed that this machine has excellent performance, advanced sorting goals, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This product is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum niobium, tantalum niobium ore and other non-ferrous metal ores, rare mineral metals or non-metallic mineral bodies with gravity differences. 2、 The working principle is the same: the mortar is slowly fed to the surface of the spiral groove by installing a feeding chute at the end of the rotating groove head, and sorting is carried out. The tail of the rotating groove is equipped with a valve type product selection groove, which divides the selection equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the obtained multi-directional mineral flow to be collected and led out separately. The cross-section of the spiral chute, with a slope change of ten thousand, is suitable for the separation of fine particle materials. Spiral chute bottom curve 3. The characteristic spiral concentrator is particularly concerned among many heavy concentration equipment because of its low power consumption, simple structure, small floor area, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, large single area processing output, etc. The machinery has a wide and relatively flat groove surface, and the mineral mortar flows in a large area in a laminar flow, making it more suitable for handling medium to fine (-4mm) particle sized ores. We have produced fiberglass chutes with diameters of 400, 600, 900, and 1200MM in China, Ф The processing output of 1200mm four heads is about 4-6 tons per hour. Spiral chute bottom curve IV. According to the size of ore processed, the chute can be divided into three categories: (1) coarse spiral chute. The maximum Granularity of ore feeding is above 2-3MM, and the maximum can reach 100-200mm. (2) The sand ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 This product is suitable for separating small materials with Granularity of 0.3-0.02MM to get iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten sand, sand tin, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference. Spiral chute bottom curve Spiral chute bottom curve