Spiral chutes and jigs for tailings selection

Spiral chutes and jigs for tailings selection

Spiral Chute and Jig Tailings Selection 1. Introduction: Gravity beneficiation Spiral Chute combines the characteristics of gravity beneficiation spiral chutes, spiral beneficiation machines, shakers, and centrifugal gold concentrators. After being evaluated and approved by relevant scientific research, design, universities, or beneficiation enterprises organized by the Ministry of Metallurgical Industry, it is believed that the mechanical performance is superior, the sorting indicators are advanced, and it has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgy. It is now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare metals and non colored metal minerals with different specific gravity from fine materials with a Granularity of 0.3-0.02 mm. 2、 Using techniques to establish a fiberglass spiral chute, align it with the vertical line, use an iron frame or wood to fix it in the appropriate direction, and use a sand pump to deliver the mineral sand to the top two feeding ports of the spiral. It is mixed with replenishing water to adjust the concentration of the mineral slurry. The mineral sand slurry naturally swirls from high to low, generating a single inertial centrifugal force in the rotating inclined flow rate, which varies in the specific gravity, particle size, and shape of the mineral sand, Through the influence of the gravity and centrifugal force of the swirling flow, the ore is separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings enter the tailings hopper and are connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. Spiral Chute and Jig for Tailings Selection 3. Features 1. Stable and easy operation of sorting steps 2. Allowing for a wide range of feed densities 3. Very high enrichment ratio and high recovery probability 4. Small land occupation and low water consumption 5. Simple structure, no power required 6. Large processing capacity 7. Easy installation and operation 8. Low investment and quick results Spiral Chute and Jig for Tailings Selection 4 The chute can be divided into three types according to the Granularity of the processed mineral aggregate: (1) coarse spiral chute, the maximum particle size of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethylene, tungsten, tin ore, tantalum ore, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and proportion. Spiral Chute and Jig Tailings Selection Spiral Chute and Jig Tailings Selection

Spiral chutes and jigs for tailings selection