Spiral chute press for coal mines

Spiral chute press for coal mines

Coal Mine Spiral Chute Press Machine 1. Product Overview: A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the slurry during the spiral rotation movement to achieve lightweight and heavy mineral separation. 2、 Operating principle: The spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) on the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute at the end of the installation spiral groove head, and selected for operation. The bottom is equipped with a valve block type equipment to obtain slots, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that collects and leads the intercepted multi head ore flow separately. The cross-section of the fiberglass chute and the change in slope of the curve are very suitable for the sorting of fine-grained materials. Spiral Chute Press Machine for Coal Mines III. Features: Fiberglass reinforced plastic chutes have attracted particular attention in various gravity beneficiation machinery due to their low power consumption, simple structure, small footprint, simple operation, stable beneficiation, clear beneficiation, no need to move accessories, convenient maintenance and management, and large production capacity per unit size. The equipment has a wide and stable groove surface, and the area where mineral mortar exhibits laminar flow is large. It is more suitable for processing medium to fine (-4MM) particle sized ores. Our country has made fiberglass spiral chutes with diameters of 400, 600, 900, and 1200mm, Ф The production capacity of 1200mm four head is approximately 4-6 tons/hour. The spiral chute press for coal mine is . 4. According to the Granularity of processed mineral aggregate, the chute can be divided into three types: (1) coarse spiral chute, the maximum particle size of feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) Sand ore chute, processing 2-3 millimeter sized ore. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 The application scope of this machine is to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, niobium ore and other nonferrous metals, rare mineral metals and this nonferrous metal mineral body with gravity difference from fine materials with Granularity of 0.3-0.02MM. Spiral chute press machine for coal mines Spiral chute press machine for coal mines

Spiral chute press for coal mines