How to lower the material in the spiral chute

How to lower the material in the spiral chute

How to lay down materials for spiral chutes 1. Description. The sorting of minerals by the chute belongs to the step of inclined flow sorting. Mineral mortar is provided on partially inclined inclined chutes or slopes. With the assistance of flowing water, the mineral particle group is not tight and layered. The upper part of the light mineral quickly flows out of the groove, while the lower layer of minerals with a larger proportion stay inside the groove or discharge from the bottom at a low speed. After being connected, concentrate and tailings can be obtained. Spiral chutes are machinery for mining and beneficiation, especially ideal for mineral mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of ore, high yield, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume and density, Granularity, and grade. 2、 How about the beneficiation effect of spiral chute in production principle. The screening device of the spiral concentrator is not limited to being placed on the cross (or tripod) of the support table. The average ore slurry is slowly fed to the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for sorting. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) categories radially according to grade. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that gathers and exports the obtained variable mineral flows. The transverse plane of the spiral chute and the slope of the curve vary greatly, making it suitable for the separation of small particle mineral materials. How to lower the material for a spiral chute? 3. Features: Polyurethane spraying for spiral chutes. How to lower the material for spiral chutes. Fiberglass reinforced plastic spiral chutes are particularly popular among many gravity sorting machines due to their low power consumption, simple structure, small land occupation, easy operation, stable mineral processing, clear mineral sorting, no moving parts, easy maintenance and management, strong processing capacity per unit area, and other characteristics. The machinery has a wider and smoother groove surface, and the area where the mortar presents laminar flow is huge, making it more suitable for handling medium to fine (-4mm) particle sized ores. China has produced spiral concentrators with diameters of 400, 600, 900, and 1200mm, Ф The processing capacity of 1200MM four head is about 4-6 tons per hour. How to lower the material of the spiral chute 4. Structural composition. The fiberglass chute is composed of six parts: a feeding homogenizer, a feeding trough, a rotating trough, an equipment cutting trough, a product gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by the connection of rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, solid, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The mineral sorting machine does not need to be placed on a cross (or tripod) on a support table with restricted stacking. The evenly divided slurry is slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, and sorting is carried out. The tail of the rotating groove is installed in a valve block type new product acquisition groove, and the new equipment will be sorted radially into three categories (or four types) of new products according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be separated and led out densely. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the separation of fine particle materials. 5、 Applicable. How to lower the material of spiral chute This equipment is suitable for separating fine materials with Granularity of 0.3-0.02MM to get iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, tantalum niobium ore and other nonferrous gold ores, rare ore metals and nonferrous metal mineral bodies with different specific gravity. How to lower the material for spiral chutes How to lower the material for spiral chutes

How to lower the material in the spiral chute