Spiral chute expansion diagram

Spiral chute expansion diagram

Spiral chute expansion diagram 1, overview. The re selection spiral chute summarizes the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifugal concentrators. After being evaluated by relevant scientific research, design, universities, and concentrators organized by the Ministry of Metallurgy, it has been recognized as having superior performance, advanced sorting indicators, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium, ferrochrome, pyrite, zircon sand, Rutile, monazite, phosphate rock, tungsten ore, placer tin ore, tantalum niobium ore, niobium ore and other non-ferrous metals, rare mineral metals and nonferrous metal mineral bodies with different specific gravity. 2、 Production principles. The spiral concentrator is freely placed on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The tail end is equipped with a valve block type equipment cutting groove, which divides the sorted products into three (or four) categories according to grade along the radial direction. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected variable ore flows to converge and export differently. The cross section and slope of the curve of the fiberglass chute are very suitable for the separation of small particle materials. Spiral Chute Unfolded Figure 3. Features 1. Stable and easy control of the sorting process 2. Large allowable variation range of feed concentration. 3. High enrichment ratio, high recycling rate, 4. Small land occupation and low water consumption. 5. Simple and simple construction without power. 6. Strong processing capacity. 7. Easy installation and easy operation. 8. Low investment and effective quick spiral chute expansion diagram . 4. How to adjust the grade of the spiral chute structure. The fiberglass spiral chute is composed of a feeding device, a cross (tripod), a feeding chute, a spiral groove, an acquisition groove, a gathering bucket, and a groove pillar. 5、 Scope of utilization. The spiral chute expansion diagram shows that the spiral concentrator is suitable for processing 0.6-0.03mm or vein ores and minerals, but it is unfavorable for separation when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin, tantalum niobium ore, bay or riverbank ore sand, and gold ore. Spiral chute expansion diagram Spiral chute expansion diagram

Spiral chute expansion diagram