Using spiral chutes to select gold tailings

Using spiral chutes to select gold tailings

Using spiral chutes to select gold tailings. 1、 Product Overview: A gravity beneficiation equipment that utilizes the continuous centrifugal force generated by mortar in rotary spiral motion to achieve lightweight and heavy mineral separation. The advantages and disadvantages of spiral chutes and shakers include using spiral chutes to select gold tailings. The same technical principle is that the mortar is slowly fed to the rotating groove surface through a feeding groove installed on the spiral groove head for sorting. The tail end of the spiral groove is equipped with a valve block type product cutting groove, which divides the selected equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be differentiated and aggregated for export. The cross section of the spiral concentrator has different slopes, which is particularly suitable for the separation of small particle ore materials. Use spiral chute to select gold tailings III. Features 1. Stable and easy control of the selection process. 2. The allowable variation range of ore feed concentration is relatively large. 3. The enrichment ratio is high and the recovery probability is high. 4. The area occupied is relatively small and the water consumption is small. 5. The structure is simple and does not require power. 6. The output is large. 7. The installation is simple and the operation is simple. 8. The input is small and the effect is quick. The spiral chute is used to select gold tailings . 4. The chute can be divided into three types according to the Granularity of the processed ore materials: (1) Coarse grained chute, The maximum Granularity of feeding material is above 2-3mm, and the maximum can reach 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral materials. (3) Slurry chute, with a feeding particle size of less than 0.074mm. 5、 Applicable. This equipment is suitable for separating fine materials with Granularity of 0.3-0.02MM to obtain iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, tantalum niobium ore and other nonferrous gold ores, rare ore metals and nonferrous metal mineral bodies with different specific gravity. Using spiral chutes to select gold tailings Using spiral chutes to select gold tailings

Using spiral chutes to select gold tailings