Coal washing equipment spiral chute supplier

Coal washing equipment spiral chute supplier

Coal washing equipment spiral chute supplier 1. Product overview. A gravity beneficiation equipment that utilizes the continuous centrifugal force generated by mortar in rotary spiral motion to achieve lightweight and heavy mineral separation. 2、 Operating principle: The spiral concentrator does not need to be restricted to placing the mineral separator on the cross (or tripod) of the support table. The same slurry is slowly fed to the rotating groove surface through the feeding groove on the spiral groove head, and sorting is carried out. The bottom is equipped with a valve block type product selection slot, which divides the selected equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The transverse surface of the spiral chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. Supplier 3 of Spiral Chutes for Coal Washing Equipment at . Features. 1. The selection process is stable and easy to operate. 2. The allowable variation range of feed density is large. 3. High enrichment and high recovery rate. 4. The occupied area is small and the water consumption is low. 5. The structure is simple and simple, without the need for power. 6. The production capacity is large. 7. The installation is simple and easy to operate. 8. The supplier of spiral chutes for coal washing equipment with low investment and quick results is . 4、 The structure of the spiral concentrator consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment intercepting groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The spiral groove has a pre made wear-resistant layer on the selected surface. She has the advantages of light weight, strength, durability, and the use of consumables. Above the rotating groove is a multi tube ore feeding homogenizer, which distributes ore evenly and has simple control. The mineral separator is not limited to being placed on a cross (or tripod) on a support table. The uniform slurry is slowly fed to the surface of the rotating groove through the feeding groove installed on the spiral groove head, and sorting is carried out. The tail of the spiral groove is installed in the valve type new product acquisition groove, and the selected new products are divided into three types (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The cross section of the spiral chute and the different slopes of the curve are particularly suitable for the separation of fine particle materials. 5、 Adopting a range selection dry ore spiral chute. Glass fiber reinforced plastic spiral chute is suitable for separating fine particles of iron, ferrotitanium, ferrochromium, ferrosulfide, tin, tantalum and niobium, gold, coal, monazite, Rutile, zircon, rare earth and other metal and non-metallic mineral materials with complete Density contrast. Coal washing equipment spiral chute supplier Coal washing equipment spiral chute supplier

Coal washing equipment spiral chute supplier