Manufacturing process of fiberglass spiral chute mold

Manufacturing process of fiberglass spiral chute mold

The production process of fiberglass spiral chute mold 1. Description: The gravity beneficiation process of fiberglass spiral chute mold production is widely used in the beneficiation of metal and non-metallic minerals due to its low pollution and cost. The spiral concentrator is one of the gravity separation machines, with a structural feature that the cross-section presents a cubic parabolic shape, suitable for processing finer particle sizes of -0.2mm. In the sorting process, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the tail end of the tank. 2、 Utilize methods. Erect the spiral chute, align it with the vertical line, use an iron frame or wood to set it in a suitable position, and use a slurry pump to deliver the sand ore to the two feeding ports above the spiral. This increases water and adjusts the density of the mineral slurry. The mineral slurry naturally swirls from high to low, generating an inertial centrifugal force in the swirling slope flow speed. Based on the differences in the specific gravity, particle size, and state of the mineral sand, the effect is obtained through the gravity and centrifugal force of the swirling flow, Separating the sand from the ore, the selected ore enters the concentrate hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand tank through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. FRP spiral chute mold manufacturing process 3. Features and advantages 1. Large scale, strong processing capacity, and today's mineral processing objectively conditions create benefits through large-scale production. 2. Fine granulation: for the treatment of fine and micro particle grade minerals, especially the treatment of ore materials with a particle size of -0.047 mm, the original machine can generally ensure the recovery of+0.047 mm Granularity. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., GRP spiral chute has developed from simple use of gravity and water blocking force to composite centrifugal force, equipment vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, thereby increasing the recovery rate of ore materials. 4. With energy saving and environmental protection as the basic starting point, the area and space occupied should be small, and the water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting steps, simple structure and convenient Computerized maintenance management system. The production process of fiberglass spiral chute mold is . Fourthly, according to the particle size of the processed ore, the chute can be divided into three types: (1) coarse particle spiral chute, with a maximum particle size of 2-3 millimeters or more for feeding ore, and a maximum of 100-200mm. (2) Mineral sand chute, processing 2-3 mm particle size mineral materials. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Utilize the field. The fiberglass chute is suitable for processing 0.6-0.03MM and vein ore as well as minerals, but it is unfavorable for sorting when the mud content is high. It is now widely used for processing iron ore, tungsten, sand tin, tantalum niobium ore, bay and riverbed ore sand or placer gold, and so on. Manufacturing process of fiberglass spiral chute mold Manufacturing process of fiberglass spiral chute mold

Manufacturing process of fiberglass spiral chute mold