Is the spiral chute useful for processing gold concentrate

Is the spiral chute useful for processing gold concentrate

Is the spiral chute useful for treating gold concentrate? 1. Introduction. The sorting of minerals by chute belongs to the process of inclined flow sorting. The mortar is provided with some inclined grooves or inclined surfaces. Under the push of water flow, the mineral particles are loose and layered, and the lighter minerals in the upper layer quickly discharge out of the groove. The heavy minerals in the lower layer are retained inside the groove or discharged slowly from the lower part. After being collected separately, the concentrate and tailings can be obtained. The fiberglass spiral chute is a machine for mining and beneficiation, especially ideal for mining sand in bays, river beds, sandbanks, and streams. The equipment has reasonable structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust prevention, corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Production principles. Equal mineral mortar is slowly fed onto the surface of the spiral groove through the feeding groove at the head end of the installation rotating groove for sorting. The bottom of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three categories according to grade along the radial direction. Change the selection width of each product by adjusting the position of the valve block, and the equipment gathering bucket will gather and export the obtained variable mineral flow separately. The transverse plane of the fiberglass spiral chute and the change in slope of the curve are particularly applicable for the sorting of fine particle materials. Is the spiral chute of effective in processing gold concentrate. 3、 Characteristics and advantages: 1. Super large-scale, large processing capacity, and modern mineral processing objectively conditions the creation of benefits based on scale. 2. Fine granulation: for the treatment of fine minerals, especially for the treatment of ores with a particle size of -0.047mm, the original machine can generally ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple use of gravity and water blocking force to composite use of centrifugal force, mechanical vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of applicable minerals and the separation of fine particles from these fine particles are enhanced, thereby improving the recovery rate of ore materials. 4. The basic starting point is to save energy, reduce energy consumption and protect the environment. The area and space occupied should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. Is the spiral chute effective in treating gold concentrate. 4、 The structural composition of the fiberglass chute is composed of a feeding device, a cross (tripod), a feeding groove, a rotating groove, a receiving groove, a gathering bucket, and a groove support. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethylene, tungsten, tin ore, tantalum ore, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and proportion. Is the spiral chute good for processing gold concentrate? Is the spiral chute good for processing gold concentrate

Is the spiral chute useful for processing gold concentrate