Jiangxi Mineral Processing Spiral Chute Factory Direct Sales

Jiangxi Mineral Processing Spiral Chute Factory Direct Sales

Jiangxi Mineral Processing Spiral Chute Factory Direct Sales 1. Introduction to Spiral Chutes in Coal Storage Bins. Chute beneficiation belongs to the slope flow separation step. The mortar is fed to some inclined grooves or slopes, and with the assistance of flowing water, the mineral particle group is not tightened and layered. The upper part of the light mineral material is quickly discharged to the outside of the groove, while the lower layer of heavy mineral material is retained in the inner groove or slowly flows out from the lower end. After being picked up, fine beneficiation and tailings can be obtained. The spiral concentrator is a mining and beneficiation machine, especially ideal for mining and beneficiation of mineral sand in bays, rivers, beaches, and streams. The product has the characteristics of reasonable structure, simple installation, less land occupation, simple operation, stable beneficiation, clear mineral separation, strong processing ability, high efficiency, ultra-high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong adaptability to fluctuations in feed volume or density, Granularity, and grade., Jiangxi beneficiation spiral chute manufacturer's direct sales II. Use skills to set up the spiral chute, calibrate the vertical line, use iron shelves or wood to locate the appropriate position, use the sand pump to transport the ore sand to the two ore inlets above the spiral, mix in the increased water, adjust the density of the ore slurry, and the ore slurry naturally swirls from high to low. A coherent centrifugal force occurs in the flow speed of the rotating inclined plane to obtain the difference in gravity, Granularity and shape of the sand, By utilizing the functions of gravity and centrifugal force generated by swirling flow, the ore and sand are separated. The concentrate flows into the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand pit through a pipeline. Then, they are discharged by a slurry pump, completing the entire beneficiation process. Jiangxi beneficiation spiral chute manufacturer direct sales III. Characteristics and advantages. Jiangxi Mineral Processing Spiral Chute Factory Direct Sales 1. Large scale and strong processing capacity. Currently, the overall requirement for processing mineral materials is to establish profits based on economies of scale. 2. Fine granulation is used for the treatment of fine and small particle grade mineral materials, especially for minerals with a particle size of -0.047mm. The original machinery can generally ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., GRP spiral chutes have developed from simple use of gravity and water blocking force to the level of composite use of centrifugal force, equipment vibration force, magnetic separation force, etc. Through the composite force field, the enrichment of useful mineral materials and the separation of fine particles from these fine particles are increased, thereby improving the mineral recovery rate. 4. The basic starting point is to save energy, reduce energy consumption and protect the environment. The land area and space occupied should be small, and the water consumption and power consumption should be small. 5. Convenient and flexible operation, stable selection process, simple structure, and easy maintenance management. Jiangxi Mineral Processing Spiral Chute Factory Direct Sales IV. Structural Composition. The spiral concentrator is composed of six parts, including a feeding homogenizer, a feeding chute, a spiral groove, an equipment intercepting groove, a product gathering hopper or groove bracket (including a cross or triangular frame), and so on. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The sorting surface of the spiral groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to evenly sort minerals, making control simple and convenient. The mineral screening device is not limited to being placed on a cross (or tripod) on a supporting table. Uniform mineral mortar is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be densely drawn out. The transverse section of the fiberglass chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. 5、 This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to get iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, placer tin ore, tantalum niobium, niobium ore or other non-ferrous metal ores, rare metals and non-ferrous metal minerals with different density and specific gravity. Jiangxi Mineral Processing Spiral Chute Factory Direct Sales Jiangxi Mineral Processing Spiral Chute Factory Direct Sales

Jiangxi Mineral Processing Spiral Chute Factory Direct Sales