Gold Rushing Spiral Chute

Gold Rushing Spiral Chute. 1、 The description of spiral concentrator summarizes the characteristics of gravity beneficiation spiral chute, glass fiber reinforced plastic spiral chute, shaking table and centrifugal gold concentrator. After the relevant scientific research organized by the Ministry of Metallurgy, and the identification conducted by the design, university and concentrator departments, it is recognized that this kind of equipment has excellent performance and advanced separation indicators, and has won the scientific research achievement award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is applicable to sorting iron ore, ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethyl, tungsten, cassiterite, tantalum, niobium of 0.3-0.02 mm fine materials, and other non-ferrous metals, rare mineral metals or non-metallic minerals with gravity difference. 2、 Apply techniques. The glass fiber reinforced plastic spiral chute shall be erected, the vertical line shall be calibrated, and an iron frame or wood shall be used to fix the appropriate position. The sand pump shall send the mineral sand to the two feeding ports on the screw head, and participate in making up the water to mobilize the density of mineral mortar. The mineral slurry naturally rotates from high to low, and there is a coherent centrifugal force in the flow speed of the whirling inclined plane. The difference in the specific gravity, Granularity, and shape of the sand and ore can be obtained, By utilizing the gravity of the swirling flow and the centrifugal force, the sand and ore are separated, and the selected ore enters the concentrate hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand tank through a pipeline, and then discharged by a sand pump, completing the entire beneficiation process. Gold Pan Spiral Chute. 3、 Features 1. Stable and easy control of the sorting process 2. Wide range of allowable changes in ore concentration 3. High enrichment ratio, high recycling rate, 4. Small land occupation, low water consumption 5. Simple structure, no need for power 6. Strong processing ability 7. Easy installation and operation 8. Low investment and effective fast gold washing spiral chute 4. Structural composition. The fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product selection groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The spiral groove has a pre made durable wear-resistant layer on the selected surface. He also has the advantage of lightweight, sturdy, and long-lasting consumables. The rotating groove is equipped with a multi tube feeding homogenizer to evenly distribute the ore, and the operation is not complicated. The screening machine is freely stacked on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the beginning of the spiral groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three types (or four categories) of new products along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export separately. The cross section of the spiral chute and the slope of the curve change, which is extremely applicable for the separation of fine particle materials. 5、 Use This product is used to separate fine materials with a particle size of 0.3-0.02mm to obtain iron ore, ilmenite ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus ethylene, tungsten ore, placer tin, tantalum, niobium ore or other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. Gold Rushing Spiral Chute Gold Rushing Spiral Chute