What is the distance to diameter ratio for selecting a coarse spiral chute

What is the distance to diameter ratio for selecting a coarse spiral chute

What is the distance to diameter ratio for the thickness of the spiral chute. 1、 Product Description: A gravity separation equipment that utilizes the inertial centrifugal force generated by mortar in rotary spiral motion to separate light and heavy mineral materials. 2、 The operating principle is to determine the distance to diameter ratio of the coarse selection of the spiral chute. The mineral separator of the spiral concentrator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed on the rotating groove head, and the selection is carried out. The bottom is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the change in slope of the curve are particularly suitable for the selection of small particle materials. What is the distance to diameter ratio for the coarse selection of the spiral chute? 3. Characteristics: 1. Stable and easy control of the sorting step. 2. Allowing for a large range of different feed concentrations. 3. High enrichment ratio and high recovery rate. 4. Occupying a small area and consuming less water. 5. The structure is simple and does not require power. 6. The production capacity is large. 7. The installation is simplified and easy to operate. 8. The investment is low and the effect is fast. The spiral chute is roughly selected with a distance to diameter ratio of . 4. Is the structure of the spiral chute easy to use for processing gold concentrate? The spiral chute is roughly selected with a distance to diameter ratio of fiberglass spiral chute, which is composed of a feeding homogenizer, a feeding chute, a spiral groove, and a product acquisition groove The equipment is composed of six parts, including a gathering bucket and a slot bracket (including a cross or tripod). The rotating groove formed by connecting rotating pieces is the main component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the spiral groove has a pre made durable and wear-resistant layer. It also has the advantages of lightweight, solid, and durable consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer for ore dressing, which is simple and convenient to control. The sorting machine does not need to be placed on the cross (or tripod) of the support table to restrict stacking. The uniform mineral mortar is slowly fed onto the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for selection. The tail of the spiral groove is installed in a valve type new product selection groove, allowing the sorted new products to be divided into three types (or four types) of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product agglomeration bucket is a concentric circular tube that leads to the differential aggregation of selected multi-directional mineral flows. The cross section of the fiberglass chute has different slopes, which is very suitable for the selection of fine particle mineral materials. 5、 Scope of utilization. What is the distance to diameter ratio for the selection of spiral chutes? The application range of fiberglass chutes is from 0.6 to 0.03mm for processing vein ore and ore sand, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the treatment of iron, tungsten, sand tin, tantalum niobium, coastal and riverbed mineral sand and sand gold. What is the distance to diameter ratio for the coarse selection of spiral chutes? What is the distance to diameter ratio for the coarse selection of spiral chutes

What is the distance to diameter ratio for selecting a coarse spiral chute