Can spiral chute be used for Baryte mineral energy processing

Can spiral chute be used for Baryte mineral energy processing

Can we use spiral chute for Baryte ore dressing? The structure diagram of spiral chute describes that gravity ore dressing is used to concentrate metal ores and non-metallic ores because of less environmental pollution and cost. The spiral concentrator is one of the gravity separation equipment, with a structural characteristic that the cross-section presents a cubic parabolic state, suitable for processing finer particle sizes of -0.2MM. In the sorting process, there is no need to add flushing water, and fine, medium, and tailings are selected in sections at the tail of the tank. 2、 By using the method, the fiberglass chute is erected, aligned with the vertical line, and secured in a suitable position with an iron frame or wood. The mineral sand is transported by a sand pump to the two feeding ports on the spiral, and supplementary water is added to adjust the concentration of the mineral sand slurry. The mineral sand naturally swirls from high to low, and an inertial centrifugal force appears in the swirling slope flow rate, resulting in differences in density, specific gravity, particle size, and morphology of the mineral sand, The effect of gravity and centrifugal force obtained through swirling flow separates the ore, and the concentrate enters the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and transported to the sand pit through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. Can we use spiral chute for Baryte mineral energy processing? 3. Highlights and characteristics. 1. Ultra high efficiency, high recycling rate, accurate screening of minerals; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. Can the spiral chute be used for Baryte mineral processing. The fiberglass spiral chute is composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral chute, a receiving chute, a gathering bucket, and a trough support. Can spiral chutes be used for Baryte ore dressing? 5. Scope of use: FRP spiral chutes are suitable for separating fine particles of iron, ferrotitanium, ferrochrome, pyrite, cassiterite, tantalum niobium, gold, coal, monazite, Rutile, zircon, rare earth ore, or other metal and non nonferrous metal minerals with sufficient specific gravity difference. Whether spiral chute can be used for Baryte mineral energy processing Whether spiral chute can be used for Baryte mineral energy processing

Can spiral chute be used for Baryte mineral energy processing