How to make a semi spiral chute

How to make a semi spiral chute

How to make a semi spiral chute? 1. Product overview. How to make a semi spiral chute? It is a gravity beneficiation machine that utilizes the continuous centrifugal force generated by the slurry in the spiral rotation movement to achieve lightweight and heavy mineral separation. 2、 Working principle: The fiberglass spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the selected products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that differentially merges and leads out the intercepted multi-directional mineral flow. The transverse plane and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine-grained materials. How to make a semi spiral chute with a capacity of ? 3. Features and highlights. 1. Major miniaturization and strong processing ability. Nowadays, the principle of ore processing requires large-scale production to create benefits. 2. Fine granulation: for the treatment of fine and micro particle grade minerals, especially the treatment of ore materials with a particle size of -0.047MM, the original machine can generally ensure the recovery of+0.047MM Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration and so on, the spiral concentrator has developed from simply applying gravity and water blocking force to the level of using centrifugal force, mechanical vibration force, magnetic force and so on. Through the composite force field, the enrichment of useful minerals and the separation of fine particles and these fine particles increase the recovery rate of ore materials. 4. The basic starting point is to save energy, reduce consumption and environmental protection. The floor area and space should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. How to make a semi spiral chute . 4、 The structure of the fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating pieces is the main component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the spiral groove has a pre made durable and wear-resistant layer. It also has the advantages of lightweight, solid, and durable consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer for ore dressing, which is simple and convenient to control. The sorting machine does not need to be placed on the cross (or tripod) of the support table to restrict stacking. The uniform mineral mortar is slowly fed onto the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for selection. The tail of the spiral groove is installed in a valve type new product selection groove, allowing the sorted new products to be divided into three types (or four types) of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product agglomeration bucket is a concentric circular tube that leads to the differential aggregation of selected multi-directional mineral flows. The cross section of the fiberglass chute has different slopes, which is very suitable for the selection of fine particle mineral materials. 5、 In the application field, how to make glass fiber reinforced plastic chutes for semi spiral chutes is applicable to the separation of fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and other metal and nonferrous metal minerals with completely enough density ratio difference. How to Make a Half Spiral Chute How to Make a Half Spiral Chute

How to make a semi spiral chute