Spiral chute shipment

Introduction to spiral chute shipment. Gravity separation is widely used in the beneficiation of metallic and non-metallic minerals due to its low environmental pollution and low cost. The fiberglass chute is one of the gravity beneficiation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particle sizes of -0.2mm. In the sorting step, there is no need to add water to wash, and the bottom of the chute is divided into sections to obtain fine, medium, and tailings. Spiral chute delivery 2. The production principle is the same. The slurry is slowly fed to the rotating groove surface through the feeding chute installed at the head end of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the sorting equipment is divided into three types according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block, and gather the selected multi-directional mineral flow through the equipment gathering hopper. The slope change of the cross-section and curve of the fiberglass chute is very suitable for the selection of fine particle materials. Spiral Chute Delivery III. Highlights and Features 1. Ultra high efficiency, high recovery rate, and correct ore separation; 2. No power required;, Spiral chute shipping 3 is lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low operating cost and long service life; 5 strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. Spiral Chute Delivery 4. Types of Large Pitch Spiral Chutes. According to the Granularity of processed mineral aggregate, chutes can be divided into three types: (1) Coarse grained chutes. The maximum Granularity of the feed is more than 2-3mm, and the maximum Granularity can reach 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral materials. (3) Slurry chute, with a feeding particle size of less than 0.074mm. 5、 This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, placer tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference from small materials with Granularity of 0.3-0.02MM. Spiral Chute Shipping Spiral Chute Shipping