How to feed ore with spiral chutes

How to feed ore with spiral chutes

How to use spiral chutes to separate minerals belongs to the inclined flow separation process. The slurry is fed to a inclined chute or inclined surface, and under the push of water flow, the ore particles are loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay inside the groove or slowly discharge from the lower part. After being connected separately, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machines for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, sandbanks, and river beds. The equipment has the characteristics of correct structure, simple installation, small land occupation, simple operation, stable beneficiation, clear beneficiation, strong processing ability, high efficiency, high concentration of beneficiation, high recycling rate, and reliable operation. It has the advantages of lightweight, moisture-proof, rust prevention, corrosion resistance, and strong adaptability to fluctuations in feed volume, concentration, particle size, and grade. 2、 The usage method is to make the fiberglass chute stand up, align it with the vertical line, fix it in the appropriate position with an iron frame or wood, and send the sand ore to the two feeding ports on the top of the spiral through a slurry pump. The water is added and the mineral slurry concentration is adjusted. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the rotating inclined flow rate, which is distinguished by the gravity, particle size, and state of the mineral sand, By utilizing the gravity or centrifugal force of the swirling flow, the ore and sand are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are moved to the sand pit through a pipeline. Then, they are discharged by a mortar pump, completing the entire beneficiation process. How to provide ore with a spiral chute? 3. Highlights: 1. Stable, easy to operate, and with a large density range. 2. The production and processing capacity of materials is large, with high enrichment ratio and high recycling rate. 3. It takes up little space, consumes less water, has a simple structure, and does not require power. 4. It is installed in a simple and simple manner, with easy operation, low investment, and fast efficiency. How to feed the ore with a spiral chute? 4. Structural composition: The fiberglass chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, an equipment selection chute, a product gathering hopper, or a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), connected together by screws, and the rotating groove has a pre designed durable wear-resistant layer on the selected surface. It also has the advantages of light weight, durability, and durability in using consumer goods. Above the spiral groove is a multi tube feeding homogenizer that screens ore evenly, making it easy and convenient to operate. The sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface by installing the feeding groove at the head end of the rotating groove for sorting. The tail of the rotating groove is equipped with a valve type new equipment to cut the groove and classify the selected new products into three categories (or four categories) radially according to grade. Change the width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the selected multi head ore flows to converge and lead out separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the selection of fine-grained ore. 5、 This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus ethyl, tungsten, sand tin, tantalum niobium, tantalum niobium of fine materials with a particle size of 0.3-0.02mm, and has the specific gravity difference to obtain other non-ferrous metal ores, rare metals and this non-metallic orebody. How to feed ore with spiral chutes How to feed ore with spiral chutes

How to feed ore with spiral chutes