Ganzhou spiral chute

Ganzhou Spiral Chute 1. Explanation: Chute sorting includes a slope flow sorting process. Mineral mortar is fed to some inclined grooves or slopes, and under the push of water, the mineral particle group becomes loose and layered. The upper layer of light mineral quickly flows out of the groove, while the lower layer of heavy mineral material stays in the groove or is discharged from the bottom at low speed. After being collected, the selected ore and tailings are obtained. Spiral chutes are mining and beneficiation machines, especially ideal for sand mining on coasts, rivers, beaches, and streams. The equipment has the characteristics of suitable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear ore separation, large processing volume, high efficiency, high concentration of beneficiation, high recovery rate, and reliable operation. There are also advantages such as small weight, moisture prevention, rust prevention, less corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The use method is to erect the glass fiber reinforced plastic spiral chute, calibrate the vertical line, fix it in an appropriate position with an iron frame or wood, send the ore sand to the two ore feeding ports above the spiral by the sand pump, mix in the make-up water, and adjust the concentration of the ore slurry. The ore slurry naturally swirls from high to low, generating a single coherent centrifugal force in the flow speed of the revolving inclined surface, so as to obtain the difference in the specific gravity, Granularity and state of the placer, Through the effect of gravity and centrifugal force obtained through swirling flow, the sand ore is separated, and the concentrate flows into the beneficiation hopper and is connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand pit through pipelines, and then discharged by a slurry pump, completing the entire beneficiation process. Ganzhou Spiral Chute 3. Features and Highlights 1. Large scale and strong processing capacity. Currently, the principle of ore processing requires large-scale production to create benefits. 2. Fine granulation: for the treatment of fine and micro particle grade minerals, especially the treatment of ore materials with a particle size of -0.047MM, the original machine can generally ensure the recovery of+0.047MM Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration and so on, the spiral concentrator has developed from simply applying gravity and water blocking force to the level of using centrifugal force, mechanical vibration force, magnetic force and so on. Through the composite force field, the enrichment of useful minerals and the separation of fine particles and these micro particles increase the recovery rate of ore materials. 4. The basic starting point is to save energy, reduce consumption and environmental protection. The floor area and space should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. Ganzhou spiral chute 4. The structure of the fiberglass spiral chute consists of a feeding average device, a cross (tripod), a feeding groove, a rotating groove, a selection groove, a gathering bucket, and a groove pillar. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03mm and vein ore as well as sand ore, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used for processing iron ore, tungsten, tin ore, tantalum niobium ore, coastal and riverbed ore, or gold ore. Ganzhou Spiral Chute Ganzhou Spiral Chute