Spiral chute re selection process method

Spiral chute re selection process method

Spiral chute gravity separation process method 1 introduces that gravity separation is widely used in the beneficiation of metallic and non-metallic ores due to its low environmental pollution and low cost. Glass fiber reinforced plastic chute is one of the gravity beneficiation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particle sizes of -0.2mm. In the sorting step, there is no need to add water to wash, and the bottom of the chute is divided into sections to obtain refined, medium, and tailings. 2、 Use a method to make the fiberglass chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable direction, and use a sand pump to send the ore sand to the top two inlet ports of the spiral. The ore sand slurry enters to increase water and adjust its density. The mineral slurry naturally swirls from top to bottom, and an inertial centrifugal force occurs in the rotating inclined flow rate, resulting in differences in gravity, particle size, and shape of the sand ore, By separating the ore from the sand through the influence of the gravity and centrifugal force of the swirling flow, the concentrate enters the beneficiation hopper and is piped out. The tailings enter the tailings hopper and are piped to the sand tank, which is then discharged by a mortar pump, completing the entire beneficiation process. Method 3, Advantages or Features of the Spiral Chute Gravity Separation Process: 1. High efficiency, high recovery rate, and accurate mineral separation; 2. Do not use power; 3. Small weight, anti rust, durable and anti wear, durable and anti corrosion; Low cost and long service life; 5 pairs of strong applicability for fluctuations in feed volume, density, particle size, and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. Spiral chute re selection process method 4. Structural composition: Spiral chutes are composed of a feeding homogenizer, a cross (tripod), a feeding trough, a spiral trough, a cutting trough, a gathering hopper, and a trough pillar. 5、 This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, placer tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference from small materials with Granularity of 0.3-0.02MM. Spiral chute reselection process method Spiral chute reselection process method

Spiral chute re selection process method