1.5 meter spiral chute production

1.5 meter spiral chute production

1.5 meter spiral chute production: 1. Describing that the chute sorting of minerals belongs to the inclined flow sorting step. Mineral mortar is provided on partially inclined inclined chutes or slopes. With the assistance of flowing water, the mineral particle group is not tight and layered. The upper part of the light mineral quickly flows out of the groove, while the lower layer of minerals with a larger proportion stay inside the groove or discharge from the bottom at a low speed. After being connected, concentrate and tailings can be obtained. Spiral chutes are machinery for mining and beneficiation, especially ideal for mineral mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of ore, high yield, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume and density, Granularity, and grade. 2、 The production principle is that the evenly proportioned mortar is slowly fed onto the rotating groove surface by the feeding groove at the beginning of the spiral groove, and is selected. The tail end of the spiral groove is equipped with a valve block type equipment to cut the groove, allowing the sorted products to be divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the selection width of each equipment, the product gathering hopper will merge and export the obtained multi head ore flow differently. The transverse plane and curve slope of the fiberglass spiral chute are different, especially suitable for the selection of small particle materials. Output of 1.5m spiral chute 3. Features 1. Stable separation process and easy control 2. Large allowable range of ore feed concentration 3. High enrichment ratio and high recovery probability 4. Small land area occupied and low water consumption 5. Simple structure, no power required 6. Strong processing capacity 7. Easy installation and operation 8. Small investment, quick effect of 1.5m spiral chute output 4. Granularity of mineral materials obtained according to types, Chutes can be divided into three types: (1) Coarse grain chutes. The maximum Granularity of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 Application This product is applicable to sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, cassiterite, tantalum ore, niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with specific gravity difference. 1.5 meter spiral chute production 1.5 meter spiral chute production

1.5 meter spiral chute production