Spiral chute recycling tailings feed particle size

Spiral chute recycling tailings feed particle size

A gravity separation equipment that uses the inertial centrifugal force generated by mortar in spiral motion to achieve the separation of light and heavy minerals. 2、 The production principle is that the evenly proportioned mortar is slowly fed onto the rotating groove surface through a feeding chute installed on the spiral groove head for sorting. The tail end of the spiral groove is equipped with a valve type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected variable mineral flows to converge and export differently. The transverse plane and slope of the curve of the fiberglass spiral chute vary greatly, and the applicable range is for the selection of fine particle materials. Spiral chute recycling tailings feed particle size 3. Characteristics 1. Stable sorting process and easy control 2. Large allowable variation range of feed concentration 3. Ultra high enrichment ratio and high recycling utilization rate 4. Small land occupation and water consumption 5. Simple structure, no power required 6. High production capacity 7. Simplified installation and easy operation 8. Small investment and quick effect spiral chute recycling tailings feed particle size 4 The structural composition of the spiral concentrator consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment intercepting groove, a product gathering hopper or groove support (including a cross or triangular frame), and so on. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The sorting surface of the spiral groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to evenly sort minerals, making control simple and convenient. The mineral screening device is not limited to being placed on a cross (or tripod) on a supporting table. Uniform mineral mortar is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be densely drawn out. The transverse section of the fiberglass chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. 5、 Applicable field: FRP chutes are suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other metal and non nonferrous metal minerals with complete density ratio difference. Spiral chute recycling tailings feed particle size Spiral chute recycling tailings feed particle size

Spiral chute recycling tailings feed particle size