Rubber spiral chute

Rubber spiral chute 1 indicates that gravity separation is widely used in the beneficiation of metal or non-ferrous metal mines due to its low environmental pollution and cost. Spiral chute is one of the gravity beneficiation machinery, with a structural feature that the cross-section presents a cubic parabolic shape, suitable for handling finer particle levels of -0.2mm. During the beneficiation process, there is no need to add water for flushing, and the tail of the chute is divided into sections to select fine, medium, and tailings. 2、 The working principle of the spiral mineral separator is that the mineral separator is freely placed on the cross (or tripod) of the support table. The same slurry is slowly fed onto the spiral groove surface of the feeding groove installed on the rotating groove head for sorting. The tail end is equipped with a valve block type product cutting groove, allowing the sorting equipment to be divided into three (or four) types according to grade along the radial direction. Change the acquisition width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that distinguishes and aggregates the selected multi-directional mineral flow. The transverse surface of the fiberglass chute has a slope change that is extremely suitable for the selection of fine-grained materials. rubber spiral chute 3. Special features 1. Stable separation process and simple control 2. Large allowable range of ore feed concentration 3. High enrichment ratio and high recovery probability 4. Small area occupied and low water consumption 5. Simple structure and no power required 6. Large processing capacity 7. Simple installation and easy operation 8. Small investment and quick effect rubber spiral chute 4. Classification according to the size of ore processed, Chutes can be divided into three types: (1) coarse spiral chute, the maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The sand ore chute is used to handle 2-3MM particle grade ore materials. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 The application scope of FRP chutes is to separate fine iron ore, Ilmenite, Chromite, pyrite, tin, tantalum niobium, gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and non nonferrous metal minerals with completely sufficient density and gravity difference. Rubber spiral chute Rubber spiral chute