Jiangxi Mineral Processing Spiral Chute Factory Direct Sales

Jiangxi Mineral Processing Spiral Chute Factory Direct Sales

Jiangxi Mineral Processing Spiral Chute Factory Direct Sales 1. Explanation: Chute sorting includes inclined flow sorting process. When the mortar is fed to a partially inclined chute or slope, with the assistance of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral materials is quickly discharged from the outside of the groove, while the lower layer of minerals with high specific gravity are retained inside the groove or slowly discharged from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them particularly ideal for mineral mining along coasts, rivers, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of minerals, high yield, high efficiency, high beneficiation concentration ratio, high recovery probability, and stable operation. There are also advantages such as small weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The production principle is the same: the slurry is slowly fed to the rotating groove surface through the feeding chute at the head end of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the sorting equipment is divided into three types according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block, and gather the selected multi-directional mineral flow through the equipment gathering hopper. The slope change of the cross-section and curve of the fiberglass chute is very suitable for the selection of fine particle materials. Jiangxi Mineral Processing Spiral Chute Factory Direct Sales III. Features: Fiberglass reinforced plastic chutes have attracted special attention among various gravity mineral processing machines due to their low power consumption, simple structure, small footprint, easy operation, stable mineral processing, clear ore separation, no need for moving parts, convenient maintenance and management, and high output per unit area. The machinery has a relatively wide and stable groove surface, and the mineral mortar exhibits a large area of laminar flow, making it more suitable for processing medium to fine (-4mm) sized ores. We have made spiral chutes with diameters of 400, 600, 900, and 1200 millimeters domestically, Ф The processing capacity of 1200MM four head is about 4-6 T/H. Jiangxi Mineral Processing Spiral Chute Factory Direct Sales 4. Structural Composition: The spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, an equipment selection chute, a product gathering hopper, and a support bracket (including a cross or triangular frame). The spiral groove formed by connecting rotating discs is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue), and a wear-resistant layer is pre made on the sorting surface of the rotating groove through bolts. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is easy to operate. The mineral sorting device is freely placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding groove installed at the beginning of the rotating groove for selection. The bottom of the rotating groove is equipped with a valve block type new product acquisition groove, which allows the sorted new products to be divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that gathers and exports the selected variable mineral flows. The cross section and slope of the curve of the fiberglass chute are particularly suitable for the selection of fine particle materials. 5、 Scope of Application Spiral chute is applicable to the separation of fine grained iron ore, ferrotitanium ore, chromite ore, pyrite, sand tin, tantalum niobium ore, placer gold ore, coal, monazite, Rutile, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient specific gravity difference. Jiangxi Mineral Processing Spiral Chute Factory Direct Sales Jiangxi Mineral Processing Spiral Chute Factory Direct Sales

Jiangxi Mineral Processing Spiral Chute Factory Direct Sales