Spiral chute design software

Spiral chute design software

Spiral chute design software 1. Explanation: The re selection spiral chute integrates the characteristics of fiberglass spiral chute, fiberglass spiral chute, shaking table, and centrifugal gold concentrator. After organizing relevant scientific research by the Ministry of Metallurgical Industry, the design, school, and other departments of this beneficiation enterprise have passed the operation appraisal, and it is recognized that this equipment has excellent performance and advanced selection indicators. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry, and has been awarded in the field of non-ferrous metals Ferrous mines are widely used. This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphoethylene, tungsten ore sand, tin placer, tantalite, tantalum niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal ore objects due to gravity difference. 2、 Working principle: The fiberglass spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the selected products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that differentially merges and leads out the intercepted multi-directional mineral flow. The transverse plane and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine-grained materials. The design software for the spiral chute features three highlights: 1. Stable, easy to control, and a relatively large concentration range. 2. The material production output is large, the enrichment ratio is high, and the recycling rate is high. 3. It occupies a small area, consumes less water, has a simple structure, and does not require power. 4. Easy installation, easy operation, minimal investment, and quick returns. Spiral chute design software 4. The structure of a spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper, and a support bracket (including a cross or triangular frame). The spiral groove connected by the rotating plate is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, sturdy, and long-lasting consumer goods that are not easily damaged. The spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is easy to operate. There is no need to restrict the stacking of mineral sievers on the cross (or tripod) of the support table. The evenly distributed mineral mortar is slowly fed to the surface of the spiral groove through the feeding groove at the beginning of the rotating groove, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type new product selection groove, which allows the sorting equipment to be divided into three categories (or four types) of new products according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows. The cross section and slope of the curve of the fiberglass chute are very suitable for the selection of fine particle materials. 5、 Scope of application: FRP spiral chute is applicable to the separation of fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metals and non-ferrous metal minerals with full density ratio difference. Spiral chute design software Spiral chute design software

Spiral chute design software