The height of the spiral chute

The height of the spiral chute

The height of spiral chutes: 1. Introduction: Spiral chutes summarize the characteristics of gravity beneficiation spiral chutes, fiberglass spiral chutes, shakers, and beneficiation centrifuges. After relevant scientific research organized by the Ministry of Metallurgy, and appraisal conducted by departments such as design, school, and beneficiation company, they have been recognized as having superior mechanical performance and advanced sorting indicators, and have been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgy Industry. They are now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating iron, ferrotitanium, chromite ore, pyrite, zircon ore, Rutile, monazite, phosphate rock, tungsten sand, placer tin, tantalum niobium ore, niobium ore and other nonferrous metals, rare mineral metals and nonferrous metal ore bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02mm. 2、 Technical principle: The spiral chute separator is not limited to being placed on the cross (or tripod) of the support table. Equal slurry is slowly fed to the spiral groove surface through the feeding chute at the end of the rotating groove head for sorting. The bottom is equipped with a valve block type equipment acquisition slot, allowing other products to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows separately. The transverse surface of the fiberglass chute has a very variable slope, which is suitable for the selection of fine particle materials. The height 3, advantages and characteristics of the spiral chute: 1. High efficiency, high recovery rate, and correct ore sorting; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low operating costs and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force caused by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The height of spiral chute is . 4. The chute can be divided into three categories according to the particle size of the processed ore materials: (1) Coarse chute. The maximum Granularity of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The slurry spiral chute, with a feeding particle size of less than 0.074mm. 5、 This machine is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore, placer tin ore, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare ore metals and non-metallic ore bodies with gravity difference from 0.3-0.02mm fine materials. Height of spiral chute Height of spiral chute

The height of the spiral chute