Structural Drawing of Spiral Chute

Structural Drawing of Spiral Chute

The spiral chute structure diagram I describes the spiral concentrator, which summarizes the characteristics of gravity beneficiation spiral chute, glass fiber reinforced plastic spiral chute, shaking table and centrifugal gold concentrator. After relevant scientific research organized by the Ministry of Metallurgy, and identification by the design, university, concentrator and other departments, it is recognized that this kind of equipment has excellent performance and advanced separation indicators, and has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is applicable to sorting iron ore, ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethyl, tungsten, cassiterite, tantalum, niobium of 0.3-0.02 mm fine materials, and other non-ferrous metals, rare mineral metals or non-metallic minerals with gravity difference. 2、 Production principle: The spiral concentrator is freely placed on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The tail end is equipped with a valve block type equipment cutting groove, which divides the sorted products into three (or four) categories according to grade along the radial direction. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected variable ore flows to converge and export differently. The cross section and slope of the curve of the fiberglass chute are very suitable for the separation of small particle materials. Structural Drawing of the Spiral Chute at . Features and Advantages: 1. Large scale and high processing output. Nowadays, mineral material processing generally requires scale efficiency to create benefits. 2. Fine granulation is used for the treatment of fine-grained mineral materials, especially for minerals with a particle size of -0.047mm. The original machinery can generally ensure the recovery of a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., GRP chutes have developed from the simple use of gravity and water blocking force to the level of composite application of centrifugal force, equipment vibration force, magnetic force, etc. Through a composite force field, the enrichment of useful mineral materials and the separation of fine and micro particles are increased, thereby improving the mineral recovery rate. 4. The basic starting point is to save energy consumption, reduce energy consumption and protect the environment, occupy small area and space, and consume less water and electricity. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. Spiral chute structure diagram 4. Structural composition: The fiberglass chute is composed of six parts: feeding homogenizer, feeding groove, rotating groove, product cutting groove, equipment gathering hopper or groove bracket (including cross or triangular frame), etc. The spiral groove connected by the spiral plate is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a predetermined wear-resistant layer. It also has the advantages of lightweight, sturdy, and durable consumer goods. Above the spiral groove, there is a multi tube feeding homogenizer for ore dressing and averaging, with simple control. The mineral screening device is freely placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed to the rotating groove surface by installing it on the feeding groove at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product acquisition groove, and the selected new products are divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted variable mineral flows to be gathered and exported separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine ore materials. 5、 This machine is used to separate 0.3-0.02mm fine materials to obtain iron, ferrotitanium, ferrochrome, ferrosulfur, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum niobium, niobium ore and other non-ferrous metal ores, rare mineral metals and non gold minerals with gravity difference. Structural Drawing of Spiral Chute Structural Drawing of Spiral Chute

Structural Drawing of Spiral Chute