current location: home > News and information > Reselection of knowledge
update date:2023-07-20 03:50:27Number of views: author:huang
How is the beneficiation effect of the spiral chute? 1. Equipment description: A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the slurry in the spiral rotary motion to achieve lightweight and heavy mineral separation. 2、 Production principle: The screening device of the spiral concentrator is not limited to being placed on the cross (or tripod) of the support table. The average ore slurry is slowly fed to the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for sorting. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) categories radially according to grade. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that gathers and exports the obtained variable mineral flows. The transverse plane of the spiral chute and the slope of the curve vary greatly, making it suitable for the separation of small particle mineral materials. How about the beneficiation effect of spiral chute? 3. The characteristics of spiral chute, such as low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, large production per unit area and so on, have attracted much attention in various gravity separation machines. The equipment has a wider and flatter groove surface, and the mortar presents a large laminar flow area, making it more suitable for processing medium to fine (-4mm) particle sized ores. Our country has made fiberglass spiral chutes with diameters of 400, 600, 900, and 1200 millimeters, Ф The processing capacity of 1200MM four head is about 4-6 t/h. How is the beneficiation effect of the spiral chute
? 4. The structural composition of the fiberglass chute is composed of six parts: a feeding homogenizer, a feeding trough, a rotating trough, a product intercepting trough, an equipment gathering hopper or a trough bracket (including a cross or triangular frame), and so on. The spiral groove connected by the spiral plate is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a predetermined wear-resistant layer. It also has the advantages of lightweight, sturdy, and durable consumer goods. Above the spiral groove, there is a multi tube feeding homogenizer for ore dressing and averaging, with simple control. The mineral screening device is freely placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed to the rotating groove surface by installing it on the feeding groove at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product acquisition groove, and the selected new products are divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted variable mineral flows to be gathered and exported separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine ore materials. 5、 The use of a range spiral concentrator is suitable for processing 0.6-0.03mm or vein ore and minerals, but it is unfavorable for separation when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin, tantalum niobium ore, bay or riverbank ore sand, and gold ore. How about the beneficiation effect of the spiral chute