Spiral chute adjustment

Spiral chute adjustment: 1. Explanation: The chute sorting includes the inclined surface flow sorting process. Mortar is fed to some inclined grooves or slopes. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the outside of the groove, while the lower layer of heavy mineral is retained inside the groove or slowly discharged from the bottom. After each is taken, the selected ore and tailings can be obtained. The fiberglass chute is a mining and beneficiation machine, especially ideal for sand mining and beneficiation on beaches, rivers, sand banks, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear screening of minerals, large production capacity, high efficiency, high beneficiation enrichment ratio, high recycling rate, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The mineral mortar with equal production principles is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove for sorting. The bottom of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three categories according to grade along the radial direction. Change the selection width of each product by adjusting the position of the valve block, and the equipment gathering bucket will gather and export the obtained variable mineral flow separately. The transverse plane of the fiberglass spiral chute and the change in slope of the curve are particularly applicable for the sorting of fine particle materials. Spiral Chute Adjustment III. Highlights: 1. Stable, easy to operate, and with a large density range. 2. The production and processing capacity of materials is large, with high enrichment ratio and high recycling rate. 3. It takes up little space, consumes less water, has a simple structure, and does not require power. 4. It is installed in a simple and simple manner, with easy operation, low investment, and fast efficiency. Adjustment of spiral chute IV. The chute can be divided into three categories according to the Granularity of the processed ore materials: (1) Coarse grained chute. The maximum Granularity of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) The ore chute is used to handle 2-3 millimeter sized ore materials. (3) Slurry chute, with a feeding particle size less than 0.074MM. 5、 The application scope of FRP chutes is to separate fine iron ore, Ilmenite, Chromite, pyrite, tin, tantalum niobium, gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and non nonferrous metal minerals with completely sufficient density and gravity difference. Spiral chute adjustment Spiral chute adjustment