Dynamic diagram of spiral chute operation

Dynamic diagram of spiral chute operation

Dynamic diagram of spiral chute work: 1. Overview: Gravity beneficiation spiral chute summarizes the characteristics of fiberglass spiral chute, fiberglass spiral chute, shaking table, and centrifugal beneficiation machine. It has been recognized by relevant scientific research, design, university, and mining departments organized by the Ministry of Metallurgical Industry as having excellent performance and advanced selection indicators, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has now been recognized as a type of equipment in the field of non-ferrous metals Ferrous is very suitable for a large number of applications. This equipment is suitable for separating fine and small materials with Granularity of 0.3-0.02mm to obtain iron, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus and ethylene, tungsten ore sand, cassiterite, tantalum, niobium ore and other non-ferrous metals, rare mineral metals and this non-ferrous metal ore body with different specific gravity. 2、 The working principle is the same: mineral mortar is slowly fed onto the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve type product selection groove, which divides the sorting equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering bucket allows the obtained variable mineral flow to be collected and exported. The cross section and slope of the curve of the spiral concentrator are very suitable for the separation of fine particle materials. Dynamic working diagram of spiral chute 3. Features This equipment is used to separate iron ore, ferrotitanium ore, chromite, pyrite, zircon, Rutile, monazite, phosgenite, tungsten, placer tin ore, tantalite, niobium ore of 0.3-0.02mm fine material, and other non-ferrous metal ores, rare mineral metals and non-metallic minerals can be obtained with different gravity. This machine also has advantages such as stable sorting process, easy operation, wide range of feeding density, high enrichment ratio, high recovery rate, small area occupation, small water consumption, simple structure, no need for power, large processing capacity, easy installation, simple operation, low investment, and quick effectiveness. The working dynamic diagram of the spiral chute is IV. The structure of the spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper, and a support bracket (including a cross or triangular frame). The spiral groove connected by the rotating plate is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, sturdy, and long-lasting consumer goods that are not easily damaged. The spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is easy to operate. There is no need to restrict the stacking of mineral sievers on the cross (or tripod) of the support table. The evenly distributed mineral mortar is slowly fed to the surface of the spiral groove through the feeding groove at the beginning of the rotating groove, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type new product selection groove, which allows the sorting equipment to be divided into three categories (or four types) of new products according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows. The cross section and slope of the curve of the fiberglass chute are very suitable for the selection of fine particle materials. 5、 Scope of application: The spiral concentrator is suitable for processing 0.6-0.03 millimeters of vein ore and this ore sand, but it is unfavorable for separation when the mud content is high. At present, it has been widely used for processing iron ore sand, tungsten, tin ore, tantalum niobium, coastal and riverside ore sand, and placer gold. Dynamic Diagram of Spiral Chute Work Dynamic Diagram of Spiral Chute Work

Dynamic diagram of spiral chute operation