Spiral chute titanium selection process flow

Spiral chute titanium selection process flow

Spiral chute titanium selection process flow 1. Explain that the chute selection includes the inclined surface flow selection process. The slurry is fed to a inclined chute or slope, and under the assistance of water, the mineral particle group is loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay in the groove or are discharged from the bottom at low speed. After each is connected, fine beneficiation or tailings can be obtained. Spiral chutes are equipment for mining and beneficiation, especially ideal for sand mining along coasts, rivers, sandbanks, and streams. The product has the characteristics of appropriate structure, easy installation, small footprint, easy operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of small weight, moisture-proof, rust proof, not easy to corrode, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The technical principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove, implementing sorting. The tail of the rotating groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be distinguished and gathered. The cross-section of the fiberglass chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. spiral chute titanium separation process flow 3. The special FRP chute is particularly concerned in many gravity beneficiation equipment because of its low power consumption, simple structure, small area occupied, simple operation, stable beneficiation, clear screening minerals, no need for moving parts, easy maintenance and management, and large production capacity per unit area. The machinery has a relatively wide and stable groove surface, and the area where mortar flows in a laminar flow is larger, making it more suitable for processing medium to fine (-4MM) sized ores. We have produced spiral concentrators with diameters of 400, 600, 900, and 1200 millimeters domestically, Ф The output of 1200mm four heads is approximately 4-6 tons per hour. The titanium selection process flow of the spiral chute is . The structure of the fiberglass chute is composed of a feeding average device, a cross (tripod), a feeding groove, a rotating groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 The range of spiral chutes used is suitable for separating fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium, gold ore, coal, monazite ore, Rutile ore, zircon, rare earth ore or other metal and non-metallic mineral materials with sufficient specific gravity difference. Spiral chute titanium selection process flow Spiral chute titanium selection process flow

Spiral chute titanium selection process flow