Spiral Chute User Manual

Spiral chute operation manual 1 introduces that chute beneficiation belongs to the slope flow beneficiation step. The mortar is fed to some inclined grooves or slopes, and with the assistance of flowing water, the mineral particle group is not tightened and layered. The upper part of the light mineral material is quickly discharged to the outside of the groove, while the lower layer of heavy mineral material is retained in the inner groove or slowly flows out from the lower end. After being picked up, fine beneficiation and tailings can be obtained. The spiral concentrator is a mining and beneficiation machine, especially ideal for mining and beneficiation of mineral sand in bays, rivers, beaches, and streams. The product has the characteristics of reasonable structure, simple installation, less land occupation, simple operation, stable beneficiation, clear mineral separation, strong processing ability, high efficiency, ultra-high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong adaptability to feed volume or density, Granularity, and grade fluctuations. 2、 The technical principle is that the mineral mortar is slowly fed onto the rotating groove surface through a feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the multi-directional mineral flow to be differentiated and converged. The transverse surface of the fiberglass chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. User Manual for Spiral Chute 3. Features and Highlights 1. Large scale and high production capacity. Contemporary ore processing objectively requires the use of scale effects to create benefits. 2. Fine granulation refers to the treatment of fine-grained minerals, especially for mineral materials with a particle size of -0.047mm. Originally, the machine could generally ensure the recovery of a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple use of gravity and water flow blocking force to composite and applicable centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals or the separation of fine or micro particles can be increased, thereby improving the recovery rate of mineral materials. 4. Based on energy conservation, environmental protection and consumption reduction, the area and space occupied should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. Spiral chute user manual 4. Structural composition: The fiberglass chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, an equipment cutting groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by the connection of rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, solid, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The mineral sorting machine does not need to be placed on a cross (or tripod) on a support table with restricted stacking. The evenly divided slurry is slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, and sorting is carried out. The tail of the rotating groove is installed in a valve block type new product acquisition groove, and the new equipment will be sorted radially into three categories (or four types) of new products according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be separated and led out densely. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the separation of fine particle materials. 5、 Scope of application Spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin, tantalum niobium ore, placer gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore or other metal and non-metallic ore with sufficient gravity difference. Spiral Chute User Manual Spiral Chute User Manual