Spiral chute beneficiation techniques video

Spiral chute beneficiation techniques video

Spiral chute beneficiation techniques video 1 introduces the process of mineral separation by chute, which belongs to the inclined flow separation process. The mortar is provided with some inclined grooves or inclined surfaces. Under the push of water flow, the mineral particles are loose and layered, and the lighter minerals in the upper layer quickly discharge out of the groove. The heavy minerals in the lower layer are retained inside the groove or discharged slowly from the lower part. After being collected separately, the concentrate and tailings can be obtained. The fiberglass spiral chute is a machine for mining and beneficiation, especially ideal for mining sand in bays, river beds, sandbanks, and streams. The equipment has reasonable structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust prevention, corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The mineral mortar with the same technical principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type equipment selection groove, which divides the sorted products into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each device, the product gathering hopper allows the intercepted variable mineral flow to be converged and exported separately. The transverse plane of the fiberglass spiral chute is particularly suitable for the separation of fine ore materials when the slope of the curve changes. Video of spiral chute beneficiation skills 3. The special spiral concentrator has attracted more attention among various gravity separation equipment due to its low power consumption, simple structure, less land occupation, simple operation, stable beneficiation, clear ore screening, no need for moving parts, convenient Computerized maintenance management system, large processing capacity per unit size and other characteristics. Machinery with wider or flatter groove surfaces and larger areas of laminar flow of ore slurry are more suitable for processing medium to fine (-4mm) ore particles. Fiberglass spiral chutes with diameters of 400, 600, 900, and 1200MM have been produced domestically, Ф The processing output of 1200mm four heads is about 4-6 tons/hour. Spiral Chute Mineral Processing Techniques Video 4. The structure of spiral chutes consists of a feeding device, a cross (tripod), a feeding trough, a rotating trough, a selection trough, a gathering hopper, and a trough pillar. 5、 The range of spiral chutes used is suitable for separating fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium, gold ore, coal, monazite ore, Rutile ore, zircon, rare earth ore or other metal and non-metallic mineral materials with sufficient specific gravity difference. Spiral chute beneficiation skills video Spiral chute beneficiation skills video

Spiral chute beneficiation techniques video