Spiral Chute Video Collection

Spiral Chute Video Collection

Spiral Chute Video Collection 1. Description: The spiral concentrator summarizes the characteristics of gravity beneficiation spiral chutes, fiberglass spiral chutes, shakers, and centrifugal gold concentrators. After relevant scientific research organized by the Ministry of Metallurgy, appraisal by departments such as design, universities, and concentrators, it has been recognized as having excellent performance, advanced sorting indicators, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It is now in the field of non-ferrous metals Ferrous is widely used. This machine is applicable to sorting iron ore, ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethyl, tungsten, cassiterite, tantalum, niobium of 0.3-0.02 mm fine materials, and other non-ferrous metals, rare mineral metals or non-metallic minerals with gravity difference. 2、 The working principle is the same: the mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the head end of the rotating groove for sorting. The tail of the rotating groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows the obtained multi head ore flow to be differentiated, merged and exported. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the selection of fine particle materials. Spiral Chute Video Collection 3. Features or Highlights 1. Heavy duty and large processing capacity, contemporary mineral material processing generally requires the use of scale effects to create benefits. 2. Fine granulation: for the treatment of fine and small particle size minerals, especially the treatment of ore materials with a particle size of -0.047MM, the original machinery can basically ensure the recovery of+0.047MM Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP spiral chute has developed from simple use of gravity and water blocking force to composite centrifugal force, mechanical vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are enhanced, thereby increasing the ore recovery rate. 4. Based on energy conservation, consumption reduction and environmental protection, it should occupy a small area and space, and consume less water and electricity. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. The spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove connected by the rotating plate is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has one layer of pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to screen minerals evenly, which is not cumbersome to operate. The mineral sorting equipment is freely stacked on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new equipment to obtain the groove, allowing the sorted new products to be divided into three (or four) new products according to grade along the radial direction. Change the selection width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi head ore flow. The cross-section of the fiberglass chute and the change in slope of the curve are particularly applicable for the selection of fine-grained materials. 5、 This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus ethyl, tungsten, sand tin, tantalum niobium, tantalum niobium of fine materials with a particle size of 0.3-0.02mm, and has the specific gravity difference to obtain other non-ferrous metal ores, rare metals and this non-metallic orebody. Spiral Chute Video Collection Spiral Chute Video Collection

Spiral Chute Video Collection