Spiral chute of Shicheng coal washing equipment

Spiral chute of Shicheng coal washing equipment

The spiral chute of the Shicheng coal washing equipment introduces that the chute separation of minerals belongs to the inclined flow separation process. The mortar is provided with some inclined grooves or inclined surfaces. Under the push of water flow, the mineral particles are loose and layered, and the lighter minerals in the upper layer quickly discharge out of the groove. The heavy minerals in the lower layer are retained inside the groove or discharged slowly from the lower part. After being collected separately, the concentrate and tailings can be obtained. The fiberglass spiral chute is a machine for mining and beneficiation, especially ideal for mining sand in bays, river beds, sandbanks, and streams. The equipment has reasonable structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust prevention, corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The working principle is the same: the mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the head end of the rotating groove for sorting. The tail of the rotating groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows the obtained multi head ore flow to be differentiated, merged and exported. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the selection of fine particle materials. Shicheng coal washing equipment spiral chute 3. Features This machine is suitable for separating fine materials with Granularity of 0.3-0.02MM to obtain iron ore, Ilmenite, ferrochrome, ferrosulfide, zircon ore, Rutile ore, monazite ore, phosphate ore, tungsten ore, tin ore, tantalum niobium ore, tantalum niobium ore or other non-ferrous metals, rare mineral metals and non-ferrous metal mineral bodies with different density and specific gravity. This machine also has the advantages of stable sorting process, simple control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery probability, small area occupation, low water consumption, simple structure, no power required, strong processing capacity, simple installation, simple operation, low investment, and quick effectiveness. Shicheng coal washing equipment spiral chute IV. The chute can be divided into three types according to the Granularity of the processed ore materials: (1) coarse spiral chute. The maximum particle size of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 The range of spiral chutes used is suitable for separating fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium, gold ore, coal, monazite ore, Rutile ore, zircon, rare earth ore or other metal and non-metallic mineral materials with sufficient specific gravity difference. Shicheng Coal Washing Equipment Spiral Chute Shicheng Coal Washing Equipment Spiral Chute

Spiral chute of Shicheng coal washing equipment