Installation video of fiberglass spiral chute

Installation video of fiberglass spiral chute

Introduction to the Installation of Fiberglass Reinforced Plastic Spiral Chutes: Gravity beneficiation is widely used in the beneficiation of metal and non-ferrous metals due to its small environmental pollution and low cost. The fiberglass spiral chute is a type of gravity separation machinery, characterized by a cubic parabolic shape on the cross-section, suitable for handling finer particle levels of -0.2MM. In the selection process, there is no need to add flushing water, and fine, medium, and tailings are segmented at the tail end of the chute. 2、 Technical principle: The spiral chute separator is not limited to being placed on the cross (or tripod) of the support table. Equal slurry is slowly fed to the spiral groove surface through the feeding chute at the end of the rotating groove head for sorting. The bottom is equipped with a valve block type equipment acquisition slot, allowing other products to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows separately. The transverse surface of the fiberglass chute has a very variable slope, which is suitable for the selection of fine particle materials. Video on Installation of Glass Fiber Reinforced Plastic Spiral Chute at 3. Featured spiral chutes are particularly popular in multi force beneficiation equipment due to their low power consumption, simple construction, small area occupation, simple operation, stable beneficiation, clear screening of ore, no moving parts, easy maintenance and management, and large single area output. The machine has a wide and stable groove surface, and the area where mineral mortar exhibits laminar flow is quite large, making it more suitable for processing medium to fine (-4MM) sized ores. We in China have produced spiral concentrators with diameters of 400, 600, 900, and 1200 millimeters, Ф The processing capacity of 1200mm four heads is about 4-6 tons/hour. The installation video of fiberglass spiral chute 4. The structure of the spiral concentrator consists of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 Scope of use: FRP spiral chute is suitable for separating fine grained iron, ferrotitanium, ferrochrome, pyrite, placer tin, tantalum niobium, gold, coal, monazite, Rutile, zircon, rare earth or other metal and non-metallic mineral materials with sufficient Density contrast. Installation video of fiberglass spiral chute Installation video of fiberglass spiral chute

Installation video of fiberglass spiral chute