Old spiral chute

Old Spiral Chute 1. Product Description: A gravity separation equipment that uses the inertial centrifugal force of mortar in rotary spiral motion to separate light and heavy mineral materials. 2、 The slurry with the same technical principle is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove for selection. The tail end of the rotating groove is equipped with a valve block type equipment to select the groove, allowing the sorted products to be divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to obtain the width of each device, the product gathering hopper will differentiate and densely extract the intercepted multi-directional mineral flow. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. Old spiral chute 3. Features This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, sand tin, tantalum niobium, tantalum niobium and other non-ferrous metal ore bodies with different density and specific gravity of small materials with Granularity of 0.3-0.02mm. This machine has advantages such as stable sorting process, easy control, wide range of ore concentration tolerance, high enrichment, high recovery probability, small land occupation, low water consumption, simple structure, no need for power, large production capacity, simple installation, simple operation, small investment, and quick effectiveness. The old spiral chute IV. According to the Granularity of the processed mineral materials, the chute can be divided into three types: (1) Coarse grained chute. The maximum Granularity of the feeding material is more than 2-3mm, and the maximum can reach 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 Scope of Application Spiral chute is applicable to the separation of fine grained iron ore, ferrotitanium ore, chromite ore, pyrite, sand tin, tantalum niobium ore, placer gold ore, coal, monazite, Rutile, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient specific gravity difference. Old spiral chute Old spiral chute