Spiral chute calculation

Spiral chute calculation 1. Brief introduction The gravity concentration spiral chute is a combination of the characteristics of gravity concentration spiral chute, spiral concentrator, shaking table, centrifugal gold concentrator. It has passed the appraisal by the relevant scientific research, design, universities, mineral processing enterprises and other units organized by the Ministry of Metallurgical Industry. It believes that the mechanical performance is superior and the separation index is advanced, and it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare metals and non colored metal minerals with different specific gravity from fine materials with a Granularity of 0.3-0.02 mm. 2、 The production principle is that the evenly proportioned mortar is slowly fed onto the rotating groove surface by the feeding groove at the beginning of the spiral groove, and is selected. The tail end of the spiral groove is equipped with a valve block type equipment to cut the groove, allowing the sorted products to be divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the selection width of each equipment, the product gathering hopper will merge and export the obtained multi head ore flow differently. The transverse plane and curve slope of the fiberglass spiral chute are different, especially suitable for the selection of small particle materials. Spiral chute calculation 3. Features This machine is suitable for separating fine materials with Granularity of 0.3-0.02MM to obtain iron ore, Ilmenite, ferrochrome, ferrosulfide, zircon ore, Rutile ore, monazite ore, phosphate ore, tungsten ore, tin ore, tantalum niobium ore, tantalum niobium ore or other non-ferrous metals, rare mineral metals and non nonferrous metal mineral bodies with different density and specific gravity. This machine also has the advantages of stable sorting process, simple control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery probability, small area occupation, low water consumption, simple structure, no power required, strong processing capacity, simple installation, simple operation, low investment, and quick effectiveness. Spiral chute calculation 4. Structural composition: Spiral concentrators all consist of a feeding device, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 Application field The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin ore, tantalum niobium ore, placer gold, coal mine, monazite, Rutile, zircon sand, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Spiral Chute Calculation Spiral Chute Calculation