Plastic spiral chute manufacturer

Plastic spiral chute manufacturer

Plastic spiral chute manufacturer 1. Introduction: Spiral chutes combine the characteristics of spiral chutes, fiberglass spiral chutes, shakers, and centrifugal gold concentrators. After scientific research organized by the Ministry of Metallurgy, design, operation and appraisal by departments such as universities and concentrators, they have been recognized as having excellent performance and advanced selection targets. They have also won the Science and Technology Research Achievement Award from the Ministry of Metallurgy Industry and have been widely used in non-ferrous and black mining metals. This machine can be used to separate iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosgenite, wolframite, placer tin, tantalite, tantalum niobium ore or other nonferrous metals, rare mineral metals and nonferrous metal minerals with different density and specific gravity. 2、 Technical principle: The spiral chute mineral separator is freely stacked on a cross (or tripod) on a support table. The uniform slurry is slowly fed to the surface of the spiral groove through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three types (or four types) according to grade along the radial direction. Adjust the position of the valve block to change the selection width of each device. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the slope change of the curve are particularly applied to the sorting of fine particle materials. Manufacturer 3 of plastic spiral chutes: 1. Stable, easy to operate, and with a large density range. 2. Large material processing output, high enrichment ratio, and high recycling probability. 3. Small footprint, low water consumption, simple construction, and no need for power. 4. Easy installation, easy operation, minimal investment, and fast returns. Plastic spiral chute manufacturer IV. According to the Granularity of the processed mineral aggregate, the chute can be divided into three types: (1) coarse spiral chute, the maximum particle size of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03MM and vein or placer ores, but it is unfavorable for sorting when the mud content is high. Now it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal and riverside ore sands, and gold mines. Plastic spiral chute manufacturer Plastic spiral chute manufacturer

Plastic spiral chute manufacturer