Mineral processing shaker fiberglass spiral chute

Mineral processing shaker fiberglass spiral chute

Mineral processing shaker fiberglass spiral chute. 1、 Equipment Overview: A gravity beneficiation machine that utilizes the continuous centrifugal force generated by slurry in spiral rotation motion to achieve the separation of light and heavy minerals. The fiberglass spiral chute of the mineral processing shaker II. Technical principle: The slurry is evenly distributed and slowly fed onto the surface of the spiral chute through the feeding trough installed at the head of the rotating chute, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type equipment to cut the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be collected and led out differently. The transverse plane of the fiberglass spiral chute has a slope change curve, which is particularly suitable for the separation of small particle materials. beneficiation shaker glass fiber reinforced plastic spiral chute 3. Characteristics or advantages 1. Major and strong processing capacity. Today's mineral aggregate processing is objectively conditional on large-scale to create revenue. 2. Fine granulation: for the treatment of fine and micro particle minerals, especially the treatment of ore materials with Granularity of -0.047MM, the original equipment can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow and machine vibration, the spiral concentrator has developed from a simple use of gravity and water resistance to a composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, more useful minerals are enriched and the separation of fine particles from these fine particles increases the ore recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, the area and space occupied should be small, and the water and electricity consumption should be small. Assembly diagram of coal washing spiral chute. 5. The operation is simple and flexible, the sorting process is stable, the structure is simple and simple, and it is convenient for maintenance management. Mineral processing shaker fiberglass spiral chute . 4、 The structural composition of the spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, an equipment selection chute, a product gathering hopper, and a support bracket (including a cross or triangular frame). The spiral groove formed by connecting rotating discs is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue), and a wear-resistant layer is pre made on the sorting surface of the rotating groove through bolts. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is easy to operate. The mineral sorting device is freely placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding groove installed at the beginning of the rotating groove for selection. The bottom of the rotating groove is equipped with a valve block type new product acquisition groove, which allows the sorted new products to be divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that gathers and exports the selected variable mineral flows. The cross section and slope of the curve of the fiberglass chute are particularly suitable for the selection of fine particle materials. 5、 Apply spiral chute processing factory. This product is suitable for separating small materials with Granularity of 0.3-0.02MM to get iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten sand, sand tin, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference. Mineral processing shaker fiberglass spiral chute Mineral processing shaker fiberglass spiral chute

Mineral processing shaker fiberglass spiral chute