Internal process of spiral chute

Internal process of spiral chute

Internal Process 1 of Spiral Chute: Product Introduction. The internal process of Spiral Chute is a gravity separation machine used for the separation of light and heavy minerals by the inertial centrifugal force that occurs during the spiral movement of mineral mortar. How to feed ore with a spiral chute? Secondly, the working principle is that the fiberglass chute separator is freely placed on the cross (or tripod) of the support table. Equal mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The tail end is equipped with a valve block type product acquisition tank, which divides the selected equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected variable ore flows to converge and export separately. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine ore particles. Internal process of the spiral chute III. Characteristics. The spiral concentrator has attracted more attention among multiple gravity beneficiation equipment due to its low power consumption, simple structure, small land occupation, simple operability, stable beneficiation, clear separation of ore, no need for moving parts, easy maintenance and management, and large single area output. The machine has a wide and flat groove surface, and the mortar flows in a laminar flow with a huge area. It is more suitable for processing medium to fine (-4mm) sized ores. China has produced fiberglass spiral chutes with diameters of 400, 600, 900, and 1200mm, Ф The processing capacity of 1200MM four head is about 4-6 T/H. The internal process of spiral chute IV. The chute can be divided into three categories according to the Granularity of the processed ore materials: (1) Coarse grained chute. The maximum Granularity of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) The ore chute is used to handle 2-3 millimeter sized ore materials. (3) Slurry chute, with a feeding particle size less than 0.074MM. 5、 In the field of application, the internal process of the spiral chute spiral concentrator is suitable for processing 0.6-0.03MM and vein ores and minerals, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, bay and riverside ore and placer gold. Internal process of spiral chute Internal process of spiral chute

Internal process of spiral chute