Is it feasible to wash coal slurry with spiral chute

Is it feasible to wash coal slurry with spiral chute

Is it feasible to wash coal slurry with spiral chute? 1. Explanation. Gravity separation is widely used in the beneficiation of metal or non-ferrous metals due to its low environmental pollution and cost. Spiral chute is one of the gravity beneficiation machinery, with a structural feature that the cross-section presents a cubic parabolic shape, suitable for handling finer particle levels of -0.2mm. During the beneficiation process, there is no need to add water for flushing, and the tail of the chute is divided into sections to select fine, medium, and tailings. 2、 Operating principle: Measurement method for pitch of spiral chute. Equal mineral mortar is slowly fed onto the surface of the spiral groove through the feeding groove at the beginning of the rotating groove, and then selected for operation. The tail of the rotating groove is equipped with a valve type product acquisition groove, and the sorting equipment is divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse plane of the fiberglass spiral chute has a change in the slope of the curve, which is extremely suitable for the selection of fine particle materials. Is spiral chute coal washing slurry feasible? 3. Advantages and characteristics: 1. Stable, easy to control, with a relatively large concentration range. 2. The material has strong production and processing capabilities, high enrichment ratio, and high recycling probability. 3. Small footprint, low water consumption, simple construction, and no need for power. 4. Easy to install, easy to operate, minimal investment, and fast recovery of benefits. Is it feasible to use a spiral chute to wash coal slurry? Is it feasible to use a grit spiral chute? Is it feasible to use a spiral chute to wash coal slurry? 4. The structure of the spiral chute includes a feeding homogenizer, a cross (tripod), a feeding chute, a spiral chute, a cutting chute, a gathering bucket, and a support column. 5、 The use of a field spiral concentrator is suitable for processing 0.6-0.03 millimeters or vein ore and this sand, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used in the processing of iron, tungsten, sand tin, tantalum niobium, coastal or riverside sand mines, as well as sand gold mines. Is it feasible to wash coal slurry with spiral chute? Is it feasible to wash coal slurry with spiral chute

Is it feasible to wash coal slurry with spiral chute