Spiral Chute Experiment

Spiral chute experiment. 1、 The chute selection includes the process of inclined surface flow selection. The slurry is fed to a inclined chute or slope, and under the assistance of water, the mineral particle group is loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay in the groove or are discharged from the bottom at low speed. After each is connected, fine beneficiation or tailings can be obtained. Spiral chutes are equipment for mining and beneficiation, especially ideal for sand mining along coasts, rivers, sandbanks, and streams. The product has the characteristics of appropriate structure, easy installation, small footprint, easy operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of small weight, moisture-proof, rust proof, not easy to corrode, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 Using the animation diagram of the spiral chute principle, the spiral chute experiment will erect the spiral chute, align it with the vertical line, use an iron frame or wood to fix it in a suitable direction, and use a slurry pump to send the sand and ore to the two feeding ports above the spiral, increase water, adjust the density of the mineral slurry, and the mineral slurry will naturally swirl from high to low, generating an inertial centrifugal force in the swirling slope flow speed. The specific gravity, particle size, and The difference in status is achieved through the use of gravity and centrifugal force in the swirling flow, which separates the sand from the ore. The selected ore enters the concentrate hopper and is piped out, while the tailings are discharged into the tailings hopper and moved to the sand tank through a pipeline. Then, they are discharged by a mortar pump, completing the entire beneficiation process. Experiment 3 on the Characteristics of Spiral Chute Re-selection Process for Spiral Chutes. FRP chutes are particularly concerned in various gravity separation equipment due to their low power consumption, simple structure, less land occupation, simple operation, stable beneficiation, clear beneficiation, no need for moving accessories, convenient Computerized maintenance management system, large production per unit size and other characteristics. The machinery has a wide or relatively flat groove surface, and the mortar presents a large laminar flow area, which is more suitable for processing medium to fine (-4MM) particle size ores. We in China have made spiral concentrators with diameters of 400, 600, 900, and 1200mm, Ф The production capacity of 1200mm four heads is about 4-6 tons/hour. Spiral chute experiment 4. How to make a semi spiral chute? Fiberglass reinforced plastic chutes are all composed of a feeding homogenizer, a cross (tripod), a feeding groove, a rotating groove, a selection groove, a gathering bucket, and a groove support., 5、 Application field: Spiral chutes are used for processing 0.6-0.03mm or vein ores and minerals, but high mud content is unfavorable for sorting. It has now been widely used for processing iron, tungsten, sand tin, tantalum niobium mines, beach or river sand mines, and sand gold, among others. Spiral Chute Experiment Spiral Chute Experiment