Spiral chute gold selection

Spiral Chute Gold Selection 1, Description. Spiral chute gold gravity beneficiation is widely used in the beneficiation of metallic and non-metallic ores due to its low pollution and cost. The spiral concentrator is one of the gravity separation machines, with a structural feature that the cross-section presents a cubic parabolic shape, suitable for processing finer particle sizes of -0.2mm. In the sorting process, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the tail end of the tank. 2、 Operating principle. The uniform mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head of the spiral groove for selection. The tail of the spiral groove is equipped with a valve type product acquisition groove, which divides the sorting equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each equipment, the product gathering hopper enables the selected multi head ore flow to be densely led out. The transverse section of the fiberglass chute has a change in the slope of the curve, which is particularly suitable for the selection of fine-grained materials. Spiral Chute Gold Selection III. Features. This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium, ferrochrome, pyrite, zircon, Rutile ore, monazite ore, phosphorus, wolframite, shatin ore, tantalum niobium, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals and non colored metal minerals with gravity difference. This equipment also has advantages such as stable sorting process, easy control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery probability, small area occupation, low water consumption, simple structure, no need for power, large production capacity, simple installation, convenient operation, low investment, and fast efficiency. Spiral chute selection of gold tailings. The fiberglass chute is composed of a feeding device, a cross (tripod), a feeding groove, a rotating groove, a receiving groove, a gathering bucket, and a groove support. 5、 Usage This equipment is used to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare mineral metals and non-metallic minerals with density and specific gravity difference. Spiral chute gold selection Spiral chute gold selection