Spiral chute for selecting dry ore

Spiral chute for selecting dry ore

Dry ore selection spiral chute 1. Introduce the steps of chute separation for minerals belonging to inclined flow separation. Mineral mortar is provided on a partially inclined chute or inclined surface. With the assistance of water, the mineral particle group is not tightened and layered. The lighter mineral material on the upper part is quickly discharged to the outside of the groove, while the heavier mineral material on the lower part stays in the inner groove or flows out at a slow speed from the lower part. After being obtained separately, concentrate and tailings are obtained., The glass fiber reinforced plastic spiral chute for selecting dry ore is an equipment for mining and beneficiation, making it ideal for mining sand mines in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, less land occupation, simple operability, stable beneficiation, clear screening of ore, large processing output, high efficiency, high beneficiation concentration ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to feed volume, density, Granularity, and grade fluctuation. 2、 Production principles. The same slurry is slowly fed to the surface of the spiral groove through the feeding groove installed at the beginning of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type product cutting groove, which divides the selected equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the acquisition width of each product, the equipment gathering hopper enables the selected multi head ore flow to be densely exported separately. The transverse plane of the fiberglass spiral chute has different slopes, which is extremely suitable for the separation of fine mineral particles. dry ore selection spiral chute III. Characteristics. This product is suitable for separating 0.3-0.02mm fine materials to obtain iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, placer tin, tantalum, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different densities and specific gravity. This equipment also has stable and easy to operate selection processes, a wide range of allowable changes in feed density, high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, strong processing ability, easy installation, easy operation, low investment, and quick effectiveness. Dried ore spiral chute IV. According to the size of ore processed, the chute can be divided into three types: (1) coarse spiral chute. The maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. Dry ore spiral chute (2) sand ore chute, processing 2-3MM particle grade ore material. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, placer tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference from small materials with Granularity of 0.3-0.02MM. Dry ore spiral chute Dry ore spiral chute

Spiral chute for selecting dry ore