Experimental Report on Spiral Chute

Experimental Report on Spiral Chute

Spiral Chute Experiment Report 1: Overview of Jiangxi Coal Washing Equipment Spiral Chute. The spiral chute experiment report focuses on the application of gravity separation in metal and non-ferrous metal ore beneficiation due to its low pollution and low cost. Spiral chute is one of the gravity beneficiation machines, characterized by a cubic parabolic cross-section, suitable for processing finer particle sizes of -0.2 millimeters. During the sorting process, there is no need to add water for flushing, and the end of the chute is divided into sections to select fine, medium, and tailings. 2、 How to apply. Erect the fiberglass chute, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable direction, and use a sand pump to deliver the mineral sand to the top two ore inlet points of the spiral. This increases water and adjusts the density of the mineral sand slurry. The mineral slurry naturally swirls from top to bottom, and an inertial centrifugal force occurs in the rotating inclined flow velocity. The difference in the gravity, particle size, and shape of the sand ore is affected by the gravity obtained from the swirling flow and this centrifugal force, Separating the ore from the sand, the concentrate enters the beneficiation hopper and is piped out, while the tailings enter the tailings hopper and are piped to the sand tank, which is then discharged by a mortar pump, completing the entire beneficiation process. Experimental Report on the Spiral Chute at . 3、 Due to its low power consumption, simple structure, small land occupation, easy operation, stable beneficiation, clear mineral sorting, no moving parts, easy maintenance and management, and strong processing capacity per unit area, the fiberglass spiral chute has attracted special attention among many gravity separation machines. The machinery has a wider and smoother groove surface, and the area where the mortar presents laminar flow is huge, making it more suitable for handling medium to fine (-4mm) particle sized ores. China has produced spiral concentrators with diameters of 400, 600, 900, and 1200mm, Ф The processing capacity of 1200MM four head is about 4-6 tons per hour. The spiral chute test report IV. The chute can be divided into three categories according to the Granularity of the processed mineral materials: (1) coarse particle spiral chute. The maximum particle size of ore feeding is more than 2-3mm, and the maximum can be 100-200mm. Supplier of spiral chutes for coal washing equipment. (2) The sand ore chute is used to handle 2-3MM sized ores. (3) Slurry chute, feeding Granularity is less than 0.074mm. 5、 Scope of use. The spiral chute can be used to separate fine grained iron, ferrotitanium, ferrochrome, ferrosulfide, tin ore, tantalum niobium, gold ore, coal, monazite, Rutile, zircon, rare earth and other metal and nonferrous metal ore materials with completely different specific gravity. Spiral Chute Experimental Report Spiral Chute Experimental Report

Experimental Report on Spiral Chute