Structural Drawing of Spiral Chute

Structural Drawing of Spiral Chute

Structural Drawing of Spiral Chute 1. Introduction to Large Pitch Spiral Chute. Gravity beneficiation is widely used in the beneficiation of metal and non-ferrous metals due to its small environmental pollution and low cost. The fiberglass spiral chute is a type of gravity separation machinery, characterized by a cubic parabolic shape on the cross-section, suitable for handling finer particle levels of -0.2MM. In the selection process, there is no need to add flushing water, and fine, medium, and tailings are segmented at the tail end of the chute. 2、 Production principle: In the spiral chute processing plant, the average mineral mortar in the spiral chute structure diagram is slowly fed to the surface of the spiral chute through the feeding chute at the head end of the rotating groove, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type equipment selection groove, which divides the sorted products into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each equipment, the product gathering hopper allows for the differentiation, convergence, and export of the obtained variable mineral flow. The cross-section and slope of the spiral chute are extremely suitable for the separation of fine ore materials. Structure diagram of the spiral chute at . Advantages and features: 1. Stable, easy to operate, and with a large density range. 2. Large material processing output, high enrichment ratio, and high recycling probability. 3. Small footprint, low water consumption, simple construction, and no need for power. 4. Easy installation, easy operation, minimal investment, and fast returns. Structural Drawing of Spiral Chute IV. Chutes can be divided into three types according to the particle size of processed mineral materials: (1) Coarse grained spiral chute. The maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can be 100-200 mm. Structural Drawing of Spiral Chute (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 In the field of utilization, FRP chutes are applicable to the separation of fine iron ore, Ilmenite, Chromite, pyrite, tin, tantalum niobium, gold, coal, monazite, Rutile, zircon sand, rare earth and other metals and non nonferrous metal minerals with complete density and specific gravity difference. Structural Drawing of Spiral Chute Structural Drawing of Spiral Chute

Structural Drawing of Spiral Chute